Blue Spot Tools 200mm Zinc Plated Carbon Steel Pull Handle 78082

Blue Spot Tools 200mm Zinc Plated Carbon Steel Pull Handle

MPN: 78082

Barcode: 5028734780826

Size: 200mm

Weight: 0.11kg

Overview:

This 200mm pull handle from Blue Spot Tools is built from carbon steel with a zinc-plated finish. The zinc coating acts as a barrier between the steel body and moisture, slowing the rate of corrosion. The handle is built for permanent outdoor use. It carries a Blue Spot Tools 5-year guarantee.

Key Features and Benefits

• Corrosion Protection: The zinc coating protects the steel body against rust and corrosion in outdoor conditions.
• Structural Strength: Carbon steel construction resists bending and deforming under regular gate and door use.
• Outdoor Use: Built for permanent outdoor installation rather than temporary or decorative use.
• Ready to Install: All necessary fixings are included, with no additional hardware needed.
• 5-Year Guarantee: Backed by a Blue Spot Tools 5-year guarantee.

Specs & Attributes

• Material: Carbon steel
• Finish: Zinc plated
• Size: 200mm
• Weight: 0.11kg

Typical Applications

• Wooden garden gate
• Timber fence panel door
• Garden shed door
• Outbuilding entrance
• Workshop door
• Garage side door

How to Use

• Position: Hold the handle against the door or gate in the desired location.

• Mark: Use a pencil to mark the pilot hole positions through the base plate fixing holes.

• Drill: Drill pilot holes at each marked point before fitting.

• Align: Place the handle back over the holes and align the base plates flat against the surface.

• Fix: Insert the included screws and tighten firmly to secure the handle in place.

Frequently Asked Questions (FAQs)

• Does zinc plating rust?
  Zinc does not rust in the same way as bare steel. It forms a protective oxide layer that acts as a corrosion barrier. Over time, the zinc coating can degrade, but it does so far more slowly than uncoated steel would corrode.

• What size pull handle do I need for a shed door or garden gate?
  A 150mm to 200mm pull handle is a practical choice for most standard shed doors and garden gates. Larger or heavier doors may benefit from a longer handle, but a 200mm size suits most residential garden and outbuilding applications.

• Can zinc-plated hardware be used outdoors?
  Zinc-plated hardware can be used outdoors. The coating provides a degree of corrosion resistance that makes it more suited to outdoor conditions than bare uncoated steel. In coastal or high-humidity environments, galvanised or stainless steel hardware generally performs better over the long term.

• What is the difference between zinc-plated and galvanised steel?
  Zinc-plated steel has a thinner zinc coating applied by electrodeposition. Galvanised steel uses a thicker coating applied via a hot-dip process, giving it greater corrosion resistance. For mild outdoor conditions, zinc-plated steel is a cost-effective option. Galvanised hardware holds up better in harsher environments.

• How do I clean a zinc-plated metal handle?
  Wipe the handle down regularly with a damp cloth to remove dirt and moisture. Avoid harsh chemical cleaners, as these can damage the zinc coating. For stubborn grime, use mild soapy water, rinse thoroughly, then dry the surface with a clean cloth.

Summary

The Blue Spot Tools 200mm Zinc Plated Carbon Steel Pull Handle (78082) offers carbon steel construction with a zinc coating for corrosion protection. It suits wooden gates, fences, and shed doors. All necessary fixings are included, along with a Blue Spot Tools 5-year guarantee.