Faithfull Self Adhesive Hi Vis Red and White Hazard Tape 50mm FAITAPERWLAM

Faithfull Self Adhesive Hi Vis Red and White Hazard Warning  Tape 50mm x 33 meters

Barcode: 5023969003085

Option: FAITAPERWLAM

Size: 50mm x 33m

Colour: Red and White

Overview:

The Faithfull Self-Adhesive Hi-Vis Red and White Hazard Tape 50mm x 33m (FAITAPERWLAM) is a durable, PVC marking tape for highlighting hazards and improving awareness in busy work and public areas. The bold diagonal red/White stripes are instantly recognisable as a caution warning, making it ideal for marking walkways, stairs, ramps, edging strips and overhead hazards. With a solvent-resistant adhesive backing, it offers a long service life on a wide range of surfaces including smooth wood, smooth concrete, metal, ironwork. 

The classic diagonal Red and White stripe pattern is instantly recognised as a caution warning, making it ideal for marking walkways, restricted zones, low beams, overhead hazards and boundary edges. Flexible and easy to apply, it can be cut to size for quick, tidy hazard marking. It’s not suitable for the top edge of steps. For step noses, use purpose-made anti-slip tapes.

Key Features

• High-contrast red/white diagonal stripes for clear hazard identification

• Laminated PVC construction for tough, long-lasting performance

• Self-adhesive backing for quick application

• Solvent-resistant adhesive for improved durability and hold

• Flexible tape lays neatly around edges, posts, rails and obstacles

• Easy to cut to length for fast marking and cordoning

• Designed for use on clean, dry smooth surfaces

Specifications

• Brand: Faithfull

• Type: Self-Adhesive Hazard Marking Tape

• Code: FAITAPERWLAM

• Barcode: 5023969003085

• Colour: Red & White

• Width: 50mm

• Length: 33m

• Material: Laminated PVC

• Adhesive: self-adhesive backing

• Suitable Surfaces: Smooth, clean and dry surfaces (e.g., smooth wood, smooth painted concrete, metal, ironwork)

• Note: Not suitable for the tread section of steps

Applications

• Marking hazard zones and restricted areas in workshops and warehouses with traditional red and white diagonals

• Defining walkways, safe routes and boundaries on smooth floors

• Highlighting low beams, poles, racking and overhead obstructions

• Edge marking on ramps and entrances (surface dependent)

• General safety marking for construction, facilities, factories and emergency services

How to Use

• Clean and dry the surface thoroughly (remove dust, oil and moisture)

• Measure and cut the tape to the required length or use direct from the roll

• Apply with firm, even pressure

• Smooth down along the full length to maximise adhesion

• Avoid using on loose, dusty, damp or textured surfaces

Faithfull Red/White Hazard Tape – Key FAQs

• What is hazard stripe tape used for?
  It’s used to highlight hazards and mark out boundaries, routes and restricted areas using a high-visibility warning pattern.

• Where does it stick best?
  It performs best on clean, dry, smooth surfaces such as smooth wood, painted concrete, metal and ironwork.

• Can I use it on steps?
  It’s not suitable for the top edge of steps. For step noses, use purpose-made anti-slip/step edge tapes.

• How big is the roll?
  The tape is 50mm wide and 33 metres long, take a look at the full range of Hazard Warning Tapes from Faithfull.

• Is it easy to apply?
  Yes cut to length, press firmly onto a clean, dry smooth surface for a quick, tidy safety mark.