Fixman Hazard Self Adhesive Warning Tape 50mm 188781

Fixman UK Self Adhesive Hazard Tape 50mm x 33m Red & White

Barcode: 5024763112478

Option: 188781

Overview:

Fixman UK Self Adhesive Hazard Tape 50mm Red & White (188781) is a strong, highly visible marking tape designed to highlight hazards and improve awareness in busy areas. Made from durable PVC with an ultra-sticky rubber adhesive backing, it provides clear, instantly recognisable warning stripes for use on site, in workshops, garages, yards and around the home. Ideal for marking steps, stairs, ramps, uneven ground, obstacles and designated walkways, it’s also useful for temporary colour-coding, bundling cables and pipework, and marking lanes or spaces. Suitable for internal and external use.

Key Features

• Red & white hazard warning tape for clear safety marking

• Durable PVC tape with strong rubber adhesive backing

• Bright, instantly recognisable colours encourage caution

• Suitable for internal and external use

• Solvent-resistant adhesive for long service life

• Useful for marking walkways, steps, ramps and obstacles

• Also ideal for temporary marking and colour-coding tasks

Specifications

• Brand: Fixman

• Product Type: Self adhesive hazard marking tape

• Colour: Red & White

• Width: 50mm

• Length: 33m

• Thickness: 130 microns

• Adhesive Type: Rubber adhesive (solvent-resistant)

• Peel Adhesion: 2.2N/25mm

• Option / Product Code: 188781

• EAN / Barcode: 5024763112478

Applications

• Marking hazards on walkways and work areas

• Highlighting steps, stairs, ramps and edgings

• Warning of overhead hazards and low beams

• Marking garage pits and workshop danger zones

• Temporary marking of trailing cables and obstacles

• Colour-coding and marking lanes or designated spaces

• Bundling pipework and wires for quick identification

How to Use

• Ensure the surface is clean, dry and free from dust or oil

• Cut the required length of tape

• Apply in a straight line and press down firmly along the full length

• For corners and edges, smooth the tape down to prevent lifting

• Use overlap at joins for continuous marking

• Replace tape if it becomes worn, damaged or loses adhesion

Fixman 50mm Red & White Hazard Tape – Key FAQs

• What is red and white hazard tape used for?

  • It’s used to mark and highlight hazards, helping improve visibility and encourage caution around areas such as steps, ramps, obstacles and designated work zones.

• Can I use this tape outdoors?

  • Yes, it’s suitable for internal and external use. For best results outdoors, apply to a clean, dry surface and press firmly to secure the edges.

• What is the tape made from?

  • It’s a PVC tape with a strong rubber adhesive backing, designed for clear marking and reliable hold in demanding environments.

• Is the adhesive long lasting?

  • Yes, it uses a solvent-resistant adhesive designed for longer service life, especially when applied properly to a suitable surface.

• What size is the roll?

  • The roll is 50mm wide and 33 metres long, with a 130 micron tape thickness for durable, high-visibility marking.

• Can it be used for temporary cable marking or bundling?

  • Yes, it’s often used to mark trailing cables, bundle wires/pipework, and colour-code areas or spaces where fast, visible identification is needed.