Silverline Brick Bolster 57mm Masonry Chisel with Hand Guard PC42

Silverline Brick Bolster 57mm Masonry Chisel with Hand Guard PC42

Barcode: 5024763005350

MPN: PC42

Size: 57mm 2-1/4"

Overview:

Brick Bolster Masonry Chisel with Hand Guard (PC42) is a 57mm  wide precise bolster designed for cutting, splitting and shaping bricks, blocks and masonry where a narrower blade gives better control. The 57mm (2-1/4") cutting edge is ideal for detailed brickwork, trimming and mortar clean-up, while the shock-absorbing hand guard helps protect your knuckles from glancing hammer blows and reduces impact during repeated strikes. Forged from a single piece of solid steel with a ground, hardened and tempered cutting edge, it’s built for tough site and renovation work. The powder-coated octagonal shaft helps resist corrosion and improves grip and stability when working.

Key Features

• 57mm (2-1/4") blade width for more precise masonry cutting and trimming

• Shock-absorbing hand guard helps protect hands from mis-hits and debris

• Single-piece forged steel construction for strength and durability

• Ground cutting edge that’s hardened and tempered for longer service life

• Octagonal shaft for better control and reduced rolling when set down

• Powder-coated finish for improved corrosion resistance

Specifications

• Brand: Silverline

• MPN: PC42

• Barcode: 5024763005350

• Blade Width: 57mm (2-1/4")

• Overall Length: Approx. 220mm

• Octagonal Bar Size: 16mm

• Edge: Ground, hardened and tempered

• Finish: Matt powder coat

• Guard Material: Non-brittle soft plastic

• Colour: Blue/Black (may vary)

• Conforms To: BS3066:1995

Applications

• Cutting and trimming bricks and concrete blocks

• Splitting smaller masonry sections with better accuracy

• Chiselling off mortar dags and cleaning up joints

• Shaping masonry during repairs, alterations and renovation

• General demolition and preparation work where a narrower bolster helps

How to Use

• Mark the cut line and position the bolster accurately on the line

• Strike the head with a suitable club hammer using controlled blows

• For splitting, tap around the line first to create a break point, then finish with a firmer strike

• Support the brick/block on sand or soft ground where possible for a cleaner break

• Always wear eye protection and gloves and keep hands behind the guard

50mm Brick Bolster PC42 – Key FAQs

• What is the 57mm width best for?
  The blade is ideal for more precise trimming, joint clean-up and controlled cutting where a wider bolster can feel less accurate.

• Does the hand guard really help?
  Yes, it helps protect your knuckles from glancing blows and can reduce the shock that causes sore hands during repeated striking.

• Can it be used for removing old mortar?
  Yes, it’s useful for chiselling out old mortar and cleaning up around brickwork before repairs or re-pointing.

• What hammer should I use with it?
  A club hammer is typically used with brick bolsters. Use controlled strikes for safer and cleaner results.

• How do I maintain the cutting edge?
  Keep it clean and dry after use, store it in a dry place, and touch up the edge when required while keeping the original bevel angle.

• Is it a safer alternative to cutting with a grinder?
  Hand splitting with a bolster can reduce airborne dust compared with a disc cutter, though safe working practices and PPE are still essential.

• Is the guard removable or replaceable?
  The guard is fitted for safety; if it becomes damaged, replacing the tool is usually the simplest option for continued safe use.

• Is it suitable for professional site use?
  Yes, the forged steel build, hardened edge and guarded design make it well suited to regular site, maintenance and renovation work.