Blue Spot Tools 1.8kg (4lb) Genuine Hickory Shaft Lump Hammer 26207

Blue Spot Tools 1.8kg (4lb) Genuine Hickory Shaft Lump Hammer

MPN: 26207

Barcode: 5028734262070

Weight: 1.8kg (4lb)

Overview:

The Blue Spot Tools lump hammer has a heat treated, hardened carbon steel head and a genuine hickory shaft. It is forged for high-impact striking work and suited to heavy demolition and masonry tasks.

The polished striking face has a bevelled edge that reduces the risk of chipping on contact. The head weight distributes evenly across the face for consistent accuracy with every blow. The contoured hickory handle sits naturally in the hand and absorbs shock during use. It gives a firm, controlled grip for sustained striking work.

Key Features and Benefits

• Hardened Carbon Steel Head: Heat treated and hardened to withstand repeated impact without deforming
• Bevelled Striking Face: Reduces the risk of edge chipping on contact with hard materials
• Genuine Hickory Shaft: Naturally absorbs shock, reducing vibration transfer through the handle
• Contoured Handle: Shaped to provide a firm, controlled grip throughout each swing
• Forged Construction: Maintains head integrity under sustained heavy impact
• Polished Striking Face: Delivers consistent, clean contact on masonry and concrete surfaces
• 1.8kg (4lb) Head: Generates strong, controlled force for breaking and demolition work
• Proven Handle Material: Hickory has been the standard for professional striking tools for many decades

Specs & Attributes

• Head Material: Heat Treated Hardened Carbon Steel
• Shaft Material: Genuine Hickory
• Striking Face: Polished with Bevelled Edge
• Weight: 1.8kg (4lb)

Typical Applications

• Breaking up brickwork and masonry
• Driving chisels, bolsters, and cold chisels
• General demolition and groundwork
• Setting fence posts and stakes into ground
• Breaking concrete slabs and paving
• Stone cutting and shaping
• Driving wedges during timber or masonry splitting
• Heavy-duty construction site tasks

How to Use

• Inspect: Check the head is firmly secured to the shaft before each use.

• Grip: Hold the handle near the end for maximum swing control and force.

• Position: Align the bevelled striking face squarely with the target surface.

• Strike: Use a controlled swing and let the head weight do the work.

• Maintain: Clean the head after use and store in a dry location away from moisture.

Frequently Asked Questions (FAQs)

• What is a lump hammer used for?
  A lump hammer is used for driving chisels, bolsters, and masonry nails. It also suits demolition work, breaking paving slabs, and general groundwork where a short-handled, heavy blow is needed.

• What is the difference between a lump hammer and a club hammer?
  The two terms refer to the same type of tool. "Lump hammer" is the term most widely used in the UK. Both describe a short-handled hammer with a heavy steel head designed for impact work.

• What weight lump hammer should I use?
  For most chisel and masonry work, a hammer between 1.1kg and 1.8kg works well. Heavier heads suit larger demolition tasks, while lighter ones give more control for detailed work.

• Why is hickory used for hammer handles?
  Hickory is tough, naturally shock-absorbent, and resistant to splitting under repeated impact. It has been the standard choice for professional-grade striking tool handles across the trade for generations.

• How do I stop a hammer head from loosening on the shaft?
  Store the hammer in a dry area, as moisture causes wooden handles to shrink and the fit to loosen. Check and replace the wedge if needed, and always inspect the head before use.

Summary

The Blue Spot Tools 1.8kg (4lb) hickory shaft lump hammer is a forged, hardened carbon steel striking tool built for heavy masonry and demolition work. The genuine hickory shaft absorbs shock and the bevelled striking face reduces chipping on contact. It suits trade professionals and general users working on demanding impact tasks. Backed by the Blue Spot Tools Manufacturer's Lifetime Guarantee.