Blue Spot Tools 1.1kg (2.4lb) Genuine Hickory Shaft Lump Hammer 26201

Blue Spot Tools 1.1kg (2.4lb) Genuine Hickory Shaft Lump Hammer - 26201

MPN: 26201

Barcode: 5028734262018

Weight: 1.1kg (2.4lb)

Overview:

The Blue Spot Tools 1.1kg (2.4lb) lump hammer has a heat treated, hardened carbon steel head and a genuine hickory shaft. The lighter head weight makes it well suited to controlled striking work where a full-size club hammer would be too heavy.

The polished striking face carries a bevelled edge that reduces chipping on contact with hard materials. The head distributes weight evenly across the face for consistent results on each blow. The contoured hickory handle absorbs impact during use and sits naturally in the hand. It gives a firm grip for extended periods of chisel or masonry work.

Key Features and Benefits

• Hardened Carbon Steel Head: Heat treated to withstand repeated impact without deforming over time
• Bevelled Striking Face: Reduces edge chipping when striking chisels, bolsters, or masonry surfaces
• Genuine Hickory Shaft: Absorbs vibration on contact, reducing fatigue during extended use
• Contoured Handle: Shaped to sit naturally in the hand for a consistent, controlled grip
• Forged Construction: The head maintains its integrity under sustained impact without loosening
• Polished Striking Face: Delivers clean, accurate contact on brick, stone, and concrete
• Proven Handle Material: Hickory has been the standard for professional striking tools for generations

Specs & Attributes

• Head Material: Heat Treated Hardened Carbon Steel
• Shaft Material: Genuine Hickory
• Striking Face: Polished with Bevelled Edge
• Weight: 1.1kg (2.4lb)

Typical Applications

• Driving bolsters and cold chisels through brick and block
• Splitting or shaping individual bricks and stone
• Removing wall tiles and floor tiles during renovation
• Light demolition work in confined or restricted spaces
• Setting fence posts and small ground stakes
• Breaking out mortar joints during repointing work
• General masonry striking on smaller-scale jobs

How to Use

• Inspect: Check the head is firmly attached to the shaft and shows no cracks before starting work.

• Grip: Hold the handle toward the base for better swing control and striking force.

• Position: Place the chisel or bolster accurately on the target surface before striking.

• Strike: Use a smooth, controlled swing and allow the head weight to drive the force.

• Protect: Wear safety goggles and gloves when striking masonry or chisels to guard against flying debris.

• Store: Keep the hammer in a dry location to prevent the hickory handle from shrinking or loosening.

Frequently Asked Questions (FAQs)

• What is the difference between a 1.1kg and a 1.8kg lump hammer?
  A 1.1kg head is lighter, making it easier to control for detailed or confined work. A 1.8kg head generates more force, which suits heavier demolition and larger masonry jobs.

• Can I use a lump hammer to remove wall tiles?
  Yes. A lighter lump hammer paired with a wide bolster chisel works well for lifting and removing wall and floor tiles without damaging the substrate behind them.

• Is a lump hammer suitable for repointing brickwork?
  A lump hammer is used alongside a plugging chisel to rake out old mortar joints before repointing. The lighter 1.1kg weight suits this kind of detail work better than heavier hammers.

• How should I care for a hickory hammer handle?
  Keep the handle away from prolonged moisture or heat, as both can cause the wood to swell, shrink, or crack. Lightly sanding and oiling the handle occasionally helps maintain the wood in good condition.

• What PPE should I wear when using a lump hammer?
  Safety goggles protect against flying stone or brick fragments. Work gloves help absorb vibration and protect the hands. Sturdy, steel-toecap footwear is recommended on site.

Summary

The Blue Spot Tools 1.1kg (2.4lb) hickory shaft lump hammer is a forged, hardened carbon steel striking tool suited to controlled masonry, chiselling, and light demolition work. The genuine hickory handle absorbs shock and the bevelled face reduces chipping on contact. Backed by the Blue Spot Tools Manufacturer's Lifetime Guarantee.