Forgefix Hex Nut Sleeve Anchor Masonry Fixing M12 x 60mm Pack of 5 5SA1260

Forgefix Hex Nut Sleeve Anchor Masonry Fixing M12 x 60mm Pack of 5 5SA1260

MPN 5SA1260

Barcode 5028485063575

The sleeve wedge cones are designed to give maximum expansion even in shallow anchoring depths.

Reduced outside sleeve diameter compared to thread size for smaller hole sizes.

Offers reduced stress in base masonry materials, concrete. brick, blockwork and stone.

The anchors are manufactured with a zinc Yellow passivated for increased corrosion resistance.

Offers easier fixture removal or repositioning due to the bolt remaining in the sleeve.

Also known as Projection Bolt sleeve anchors.

Widely used for fixing balustrades, handrails, racking, holding down machinery and more. 

Specification and Main Points 

• M12 Sleeve anchors should be used with a 12mm masonry bit
• Bolt head size - 14mm 
• Maximum thickness of material to be anchored - 15mm 
• Minimum Hole Depth - 55mm
• Easy to use
• Speedy installation
• Quantity - Bag of 5
• Head type - Hex 
• Size - M12 x 60mm