Forgefix Hex Nut Sleeve Anchor M10 x 97mm Masonry Fixing 10 Pack 10SA1097

Forgefix Hex Nut Sleeve Anchor Masonry Fixing M10 x 97mm Pack of 10 (10SA1097)

MPN: 10SA1097

Barcode: 5028485152996

Product Overview:

The Forgefix M10 x 97mm Hex Nut Sleeve Anchors are ideal for through-fixing, combining ease of use and speedy installation. The sleeve wedge cones ensure maximum expansion, even with shallow anchoring depths. Their reduced outside sleeve diameter compared to the thread size makes them suitable for smaller hole sizes while reducing stress in materials like concrete, brick, blockwork, and stone.

These anchors are zinc yellow passivated, enhancing corrosion resistance. The bolt remains in the sleeve, allowing for easier fixture removal or repositioning. Also known as Projection Bolt sleeve anchors, they are commonly used for fixing balustrades, handrails, racking, and securing machinery.

Specifications:

• Bolt head size: 17mm
• Maximum thickness of material to be anchored: 59mm
• Minimum hole depth: 45mm
• Quantity: Bag of 10
• Head type: Hex
• Size: M10 x 97mm
• Installation: Easy to use, quick setup with the correct socket drive or spanner
• Material: Zinc Yellow Passivated for corrosion resistance

Application:

These sleeve anchors are frequently used for securing balustrades, handrails, racking, and machinery. Ensure accurate installation by using the proper socket drive or spanner.

All Sleeve Anchor Masonry Fixings

Frequently Asked Questions (FAQ's):

• What materials are these anchors suitable for?
  These anchors are designed for masonry materials such as concrete, brick, blockwork, and stone.
• What is the corrosion resistance of these anchors?
  The anchors feature a zinc-yellow passivation coating that enhances their corrosion resistance.
• How deep should the hole be when using these sleeve anchors?
  The minimum hole depth should be 45mm for proper installation.
• Can the fixture be repositioned?
  Yes, the bolt remains in the sleeve, allowing easier fixture removal or repositioning.
• What is the maximum material thickness these anchors can secure?
  They can anchor materials with a thickness of up to 59mm.
• How many sleeve anchors are in each pack?
  Each pack contains 10 sleeve anchors.
• Can they be used for close to edge applications?
  No for close to edge use you must use a chemical anchor fixing as this method does not put pressure on the surrounding area it becomes one.

For reliable, fast installation and robust anchoring in various materials, get your Forgefix Hex Nut Sleeve Anchor M10 x 97mm Pack of 10 today!