Trade Option: Box of 8
Everbuild Flashing Tape 10m x 75mm
Sika Code 482958
MPN FLAS075
Barcode 5029347099015
Everbuild 3 inch 75mm Wide Strong self adhesive flashing tape trade Box of 8
Aluminium foil and a bitumen rubber adhesive. The adhesive forms a strong waterproof seal by the simply pressing the tape into place by hand or roller.
Benefits:
Applications:
Notes
Prime porous surfaces with Everbuild flashing primer.
Do not apply to damp surfaces.
In cold weather adhesion may be reduced.
Bring up to temperature or heat bitumen adhesive layer with a hot air gun to
improve adhesion & pliability.
Preparation:
Surfaces must be dry,
Sound free from oil, grease and dust
Remove all loose material by scraper or wire brush.
Porous surfaces, such as concrete or brick, should be primed using Everbuild flashing tape primer. Awkward areas and tops of existing lead flashing can be pointed using Everbuild Lead mate larger flat areas can be coated with Evercryl Fibre reinforced coating.
Applying:
Cut to the required length.
Peel beck approximately 5cm of release carrier and place the tape into position.
Continue removing the release carrier whilst firmly placing the tape
Avoid unnecessary creasing.
Ensure intimate contact and ensure no air is trapped.
Using a small seam roller ensure that all edges and overlaps are sealed properly.
Overlaps should be at least 25mm.
Everbuild Official Data Sheets:
Black Jack 75mm Flashing Tape Technical Data Sheet
Everbuild Flashing Tape Product Page
Data | |
Manufacturer | Everbuild |
Reference Code | FLAS75 |
Reference Code sika | 482958 |
Size | 75mm |
Number of Parts | Box of 8 |
Colour | grey |
Name | Link |
---|---|
Everbuild Black Jack Flashing Tape Instructions Technical Data Sheet | Download Attachment |
Everbuild Black Jack Flashing Tape Safety Data Sheet | Download Attachment |