Fixman Masonry Anchor Through Bolt Fixing M10 100mm 10pk 894162

Fixman Masonry Anchor Through Bolt Fixing M10 x 100mm (Pack of 10)

Barcode: 5024763180620

Code: 894162

Overview:

The Fixman Masonry Anchor Through Bolt Fixing M10 x 100mm (Code 894162) is a heavy-duty, torque-controlled expansion anchor designed for fast, secure fixing into solid masonry such as concrete, brick and natural stone. Ideal for permanent, high-strength installations, these through bolts are perfect for fixing racking, brackets, base plates, steelwork, handrails and machinery where reliable load performance is essential. Supplied as a convenient pack of 10, each fixing is designed for straightforward through-fixing without pre-setting, helping speed up installation on site.

Key Features

• Heavy-duty through bolt anchor for solid masonry and concrete

• Torque-controlled expansion for strong, dependable holding power

• Through-fixing design supports rapid installation (no pre-setting required)

• Zinc plated / chromated style finish for improved corrosion resistance

• Suitable for wall, floor and overhead applications in solid substrates

• Supplied complete with nut and washer for secure clamping

Specifications

• Brand: Fixman

• Product Code: 894162

• Type: Masonry through bolt expansion anchor

• Thread Size: M10

• Overall Length: 100mm

• Max Fixture Thickness: 40mm

• Minimum Hole Depth: 70mm

• Recommended Drill Size: 10mm

• Material / Finish: Steel, zinc plated (corrosion resistant finish)

• Pack Size: 10 (each supplied with nut and washer)

Applications

• Securing steelwork, brackets and base plates to concrete or brick

• Fixing racking systems, storage frames and supports

• Anchoring machinery, handrails, balustrades and barriers

• Mounting signage, posts and structural components

• Permanent, non-removable heavy-duty installations in solid masonry

How to Use

• Drill a 10mm hole to at least 70mm depth into sound masonry

• Clear dust from the hole to help the anchor seat correctly

• Position the fixture and insert the through bolt through the workpiece into the hole

• Tap in gently if required until the washer sits flush on the fixture

• Tighten the nut with a spanner or socket to expand the anchor and clamp securely

• Re-check tightness after initial seating

Fixman Masonry Anchor Through Bolt Fixing M10 x 100mm – Key FAQs

• What materials can these Fixman M10 through bolts be used in?
  They’re designed for solid substrates such as concrete, brick and natural stone where the expansion anchor can grip firmly.

• What drill bit size do I need for the M10 x 100mm through bolt?
  Use a 10mm masonry drill bit and drill to a minimum hole depth of 70mm for correct anchoring.

• What does “M10 – 10 x 40 x 100mm” mean?
  M10 is the thread size, 40mm is the maximum fixture thickness it can clamp, and 100mm is the overall length of the fixing.

• Are these anchors suitable for overhead fixing?
  Yes, they can be used in overhead, wall and floor applications when installed into solid masonry and sized correctly for the load.

• Are Fixman through bolts removable or reusable?
  They can be removed, but they’re intended for permanent installations and should not be reused once removed from the substrate.

• Is a nut and washer included with each fixing?
  Yes, each through bolt is supplied complete with a nut and washer to provide secure clamping onto the fixture.

• Can I use these anchors in plasterboard or hollow block?
  No, through bolt anchors require a solid substrate to expand correctly and achieve safe holding power.

• Do I need separate plugs or sleeves?
  No, the anchor expands within the drilled hole as you tighten it, so it’s a self-expanding fixing designed for through installation.

• What’s this type of through bolt commonly used for?
  They’re ideal for racking, brackets, base plates, steelwork, machinery mounts, handrails and other heavy-duty fixings into concrete or brick.