Toupret Decorators Patch & Repair Filler Quick Dry 2kg FGREB02GB

Toupret Decorators Patch & Repair Filler Quick Dry 2kg

MPN: FGREB02GB

Barcode: 3178310017937

Weight: 2kg

Colour: White (when dry)

Overview:

Toupret Patch & Repair Filler Quick Dry is a powder-based interior repair filler for gaps, cracks, scratches, and holes. It works on plasterboard and a wide range of internal substrates, including gypsum plaster, cement, concrete, and primed wood. Once applied, the filler is ready to paint in just 3 hours and requires only one coat.

The filler mixes with water at a ratio of 450ml per 1kg of powder, giving a working time of 40 minutes. It sets without shrinkage, has no depth limit, and needs no spot priming before painting. Once dry, the white finish sands back smoothly.

Classified to BS EN 16566:2014 and NFT 36 005 (Family III, Class 3), the product achieves an adhesion rating of >0.5 MPa. It carries a 12-month guarantee from the date of purchase, provided it is stored in its original sealed packaging away from moisture.

Key Features and Benefits

• Ready to paint in 3 hours: Apply in the morning and paint the same day in standard conditions.
• One coat: A single application fills and finishes in one pass - no repeat coats needed.
• No depth limit: Fill any size hole or crack without multiple layers or staged applications.
• No shrinkage: The filler stays put as it dries - no cracking back or hollow spots.
• No spot priming required: Paint directly over the dried filler without a separate priming step.
• Smooth sanding finish: Sands back flat once dry for a clean, paint-ready surface.
• 40-minute working time: Leaves comfortable time to apply and tool off before the material begins to set.
• Water-mixed powder formula: Mix on site to the quantity needed - no waste from pre-mixed product.
• Low VOC content: VOC content below 0.1%, rendering it suitable for occupied interior spaces.
• Adhesion >0.5 MPa (EN 16566): Strong bond to a wide range of interior substrates.
• Overcoat with any finish: Compatible with any type of paint, filler, or wall coating.
• 12-month guarantee: Product guaranteed from the date of purchase when stored correctly in the original sealed pack.

Typical Applications

• Plugging gaps and cracks in plasterboard ahead of decoration
• Patching holes and scratches in gypsum plaster walls
• Repairing surface defects in cement and concrete interiors
• Filling imperfections in breeze blocks, brickwork, and stone
• Spot repairs on cellular concrete surfaces
• Patching damaged areas in primed wood before painting
• Repair work on old painted surfaces before redecoration
• Interior renovation preparation across a wide range of wall substrates

How to Use

• Prepare the substrate: The surface must be hard, cohesive, clean, dry, and free from any loose material or dust before application.

• Mix the filler: Add 450ml of water per 1kg of powder (45%). Pour the powder into the water at room temperature and stir until a smooth, lump-free consistency forms.

• Apply the filler: Apply using a filling knife, trowel, or coating blade. There is no depth limit - fill the repair area fully in one application.

• Allow to dry: Leave to dry fully before sanding or overcoating. The filler is ready to paint in approximately 3 hours. Drying times vary with coat thickness, substrate type, and ambient conditions.

• Sand back: Once fully dry, sand to a smooth, flat finish. Always wear a P2 dust mask when sanding. Protective gloves and goggles are also recommended.

• Clean tools: Wipe tools clean while the product is still wet. Dried residue can be rubbed off tools once fully set - water cleaning is not required.

Frequently Asked Questions (FAQs)

• How long does Toupret Patch & Repair Filler Quick Dry take before painting?
  Under normal conditions (20°C, 50% relative humidity), the filler is ready to paint in approximately 3 hours. Cooler temperatures, higher humidity, or thicker coats will extend this time.

• Can this filler be used on exterior surfaces?
  No. This product is for interior use only and must not be applied to exterior surfaces.

• What is the coverage of this repair filler?
  When mixed, 1kg of powder fills approximately 1 litre of volume. Coverage depends on the depth and area of the repair.

• Does the surface need priming before painting over the filler?
  No spot priming is required. Once fully dry, the filler can be overcoated directly with any type of paint, filler, or wall coating.

• What temperature range is required for application?
  Apply at temperatures between +8°C and +35°C. Do not use where relative humidity exceeds 70%.

Summary

Toupret Decorators Patch & Repair Filler Quick Dry is a professional interior powder filler for patching gaps, cracks, scratches, and holes across a broad range of internal surfaces. It sets without shrinkage, needs no spot priming, and is ready to paint in 3 hours. Backed by a 12-month guarantee and classified to BS EN 16566:2014, it gives consistent, paint-ready results on site.

"Always read the Toupret Decorators Patch & Repair Filler Quick Dry Powder Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."