Joint It Epoxy Grout Electric Battery Application Gun Pro Kit JPEG-ELEC

Joint It 2 Part Porcelain Epoxy Grout Electric Battery Application Gun Professional Kit

MPN: JPEG-ELEC

Barcode: 5391535770229

Joint in 2 part porcelain epoxy Joint pointing grout battery powered application gun for use with 2 part 400ml twin tubes with a diameter of 42mm parallel tubes, using this gun dramatically increases the speed of application and quality of the gunning, save both time an material with superior gunning.

Joint-It Porcelain Epoxy Grout professional application gun this brand new product has been developed specifically for professional pavers and landscapers seeking a superior jointing smooth application solution.

Designed to push the 2 part material through a mixing nozzle with ease and into the joints.

The gun has a dial control with 6 speed settings allows for maximum bead control and an automatic reverse on the plungers an Anti-drip feature that prevents unwanted dripping when trigger is released.

Always make sure the material being expelled from the nozzle is of uniform colour when starting a new tube.

Main Benefits:

Smooth easy application

The batterys have on board fuel gauge

For use with 2 part joint it porcelain epoxy grout

Enables smooth even application of the pointing compound

Suitable for 400ml parallel 42mm parallel tubes

Anti-drip feature prevents unwanted dripping when trigger is released

Dial control with 6 speed settings allows for maximum bead control

Capable of covering 70 meters square on a single charge

Supplied in a hard carry case for safe storage

This comprehensive kit contains:

Joint-It Epoxy Electric Application Gun

Joint-It Epoxy Anti-Bonding Wax

Joint-It Epoxy Grout Scraper Tools

Joint-It Epoxy Grout Finishing Tools

2 x Batteries

1 x Charger

Applying Joint It Epoxy Grout:

Ensure paving is clean and dry and that rain is not expected before you can complete application.

Epoxy grout should not be used below 5 degree C or above 25 degree C, the paving tiles need to be laid securely with no movement in the slabs.

Apply the Joint It Anti Bonding wax to either side of the joints using the sponge provided this is an important step as this protects the slabs acting as a barrier between the grout and the slab, the anti bonding agent makes it easy to peel off the excess grout after smoothing, the areas should be waxed no more than 10 to 15 minuites before applying the epoxy grout.

Remover the twist cap from the top of the tube attach the mixing nozzle supplied with the tube, cut the noizzle with a safety Knife to the size of the paving joints, insert the tube into the application gun squeeze the trigger to force the product through the mixing nozzle discard the first 2 centimeters of product as this may not be mixed thoughrally and may have streaks in it, now the product can be used apply the product slowly making sure that there are no gaps in your gunning the product needs to rise a fraction infront of the product to make sure that there is adequate product in the joint.

10 to 15 minuites after the grout has been applied its ready for the Joint It Smoothing Tool the most comon tool is the ball end tool pull it allong the joint to firm the product and create a smooth finish.

Once the product has begun to set and feels hard to touch its time to use the Joint It Scraper or blade keeping the tool flat on the surface remove the excess product, if the grout seems sticky its not ready and needs to be given more time this is were you see the anti bonding wax coming into its own preventing product from staining and sticking to the face areas of the porcelain the epoxy grout should come away from this surface with ease, always use the blade away from you and others little pressure should be needed dont use the blade on areas that have not been waxed.

Video Demonstration How to use and apply Joint It Epoxy Grout to Porcelain slabs in your outdoor living space.