Bond It Power frost Concentrated Frostproofer Hardener POWF1

Bond It Power frost Concentrated 1 Litre Frostproofer Hardener and Accelerator

MPN POWF1

Barcode 5060021368867

Bond It Power-frost from the Builders Professional Complete range a frostproofer and Accelerator a liquid admixture for cement mortars and concrete.

This product can be used in all situations where reduced setting time is required to protect from frost and changes in the weather.

Designed specifically for cold weather working eliminating the requirement for a second frost proofing admix.

A premium quality, concentrate additive that increases frost resistance and accelerates the setting time of cements by improving the rate of hydration and is 5 x stronger than standard formulation

Frost proofer reduces the setting time of sand and cement based mortars, renders, screeds and is the ideal choice for a cold weather admixture.

Used to facilitate all year round construction where low, ambient temperature may normally cause a lull in the rate of production.

Bond It POWER-FROST increases the rate of hydration, accelerating the rate of cure as well as allowing a reduction in the total volume of gauging water required, therefore, improving the frost resistance of the mortar or concrete.

Bond It Power Frost Proofer used in all situations to

• Improves Frost protection
• Speeds up setting times
• Developed for brick laying and rendering subjected to low and sub‐zero temperatures
• Increases rate of curing of mortar to reduce the possibility of cracking caused by frost
• 500ml Required for each 25kg bag of cement
• Chloride‐free formulation
• Non‐corrosive
• Safe with steel wall ties, reinforcements and other steel items

Other Information

Due to the final mortar or concrete being more dense the final result is an improved oil and water resistant product.

When mixed neat with Portland cement it can be used to plug holes caused by pressure leaks.

When added to the mix Bond It POWER-FROST will improve workability and increase strength gain and resistance to water penetration.

It allows up to 15% reduction in gauging water, and can also reduce curing times and shrinkage.