Blue Spot Tools Ironmongery 100mm Black Powder Coated Brenton Bolt 78010

Blue Spot Tools Ironmongery 100mm Black Powder Coated Brenton Bolt

MPN: 78010

Barcode: 5028734780109

Size: 100mm

Weight: 0.34kg

Colour: Black (Powder Coat)

Overview:

This 100mm brenton bolt from Blue Spot Tools is made from carbon steel. A black powder coat finish protects against corrosion. Designed for permanent outdoor fixing, it works on wooden gates, fences, and shed doors. All necessary fittings come included.

The bolt rod slides through an enclosed tubular housing mounted on a solid backplate. A separate keep bracket catches the bolt end when closed. This gives the assembly a secure, stable hold on timber structures.

A 5 year guarantee backs this bolt. It suits trade and home projects where a weather-resistant, permanent fastening is needed.

Key Features and Benefits

• Carbon Steel Construction: Made from carbon steel, giving the bolt the strength needed for permanent outdoor gate and fence fixings.
• Corrosion Protection: The black powder coat finish protects the steel against rust in outdoor conditions.
• External Installation Ready: Designed for permanent fixing on wooden gates, timber fences, and shed doors.
• Complete Fixing Kit: All required mounting hardware ships with the bolt - no separate hardware purchase needed.

Specs & Attributes

• Material: Carbon steel
• Finish: Black powder coated
• Bolt Length: 100mm
• Weight: 0.34kg
• Use: External / Outdoor

Typical Applications

• Wooden garden gates
• Timber fence panels and posts
• Shed doors
• Outbuilding and workshop access doors
• Garden side-access gates
• Secure outdoor enclosures

How to Use

• Position the Backplate: Hold the main bolt body against the door or gate and mark the fixing hole positions.

• Fix the Backplate: Attach the main plate using the included screws or carriage bolts and nuts.

• Mark the Keep: Close the door and mark where the keep bracket lines up with the bolt end.

• Fit the Keep: Fix the keep bracket to the adjacent frame or post using the supplied hardware.

• Test and Adjust: Slide the bolt to check it runs smoothly and seats fully. Loosen and reposition the keep if needed, then re-tighten.

Frequently Asked Questions (FAQs)

• What is the difference between a brenton bolt and a tower bolt?
  A tower bolt slides through open staples fixed to a flat backing plate. A brenton bolt uses a fully enclosed tubular housing on a heavier backplate. The enclosed body gives the bolt rod more lateral support. This makes brenton bolts a better fit for heavier timber gates.

• Can a brenton bolt be used with a padlock?
  Yes. Most brenton bolts include a loop or ring at the end of the bolt rod. This accepts a padlock shackle, letting you lock the bolt in the closed position for extra security.

• What size brenton bolt do I need for a garden gate?
  A 100mm bolt suits most standard garden gates. Heavier or wider gates may need a 150mm or 200mm bolt for a more secure hold.

• Do powder coated bolts need maintenance outdoors?
  Powder coat needs minimal upkeep. Wipe it down periodically with mild soapy water to remove dirt and moisture. Check the coating each year for chips and touch up any bare metal areas to maintain rust protection.

• How do I know which way a brenton bolt should be fitted - horizontal or vertical?
  Brenton bolts are most commonly fitted horizontally on gates and doors. The bolt rod should travel parallel to the ground, sliding into the keep on the gate post or door frame. Fitting it at the correct height - typically mid-gate or near the latch point - gives the best hold.

Summary

The Blue Spot Tools 100mm black powder coated brenton bolt is a carbon steel outdoor fixing designed for permanent installation on wooden gates, fences, and shed doors. It comes complete with all necessary mounting hardware and carries a 5 year guarantee.