Blue Spot Tools Individual 30mm Deep Hex Socket (1/2" Drive) 01703

Blue Spot Tools Individual 30mm Deep Hex Socket (1/2" Drive)

MPN: 01703

Barcode: 5028734017038

Size: 30mm | 1/2" Drive

Weight: 0.35kg

Overview:

This Blue Spot Tools 30mm deep hex socket seats over protruding bolt threads where a standard socket stops short. Made from chrome vanadium steel, it applies torque through any 1/2" drive ratchet, torque wrench, or breaker bar on M20 and similarly sized fasteners.

A knurled section runs around the body to give a controlled grip when placing the socket by hand. The mirror-polished chrome exterior carries the stamped size marking for fast identification. This product is backed by the Blue Spot Tools Lifetime Guarantee.

Key Features and Benefits

• Clears protruding threads: The deep body reaches the nut face on fasteners that a standard socket cannot engage.
• CrV steel build: Stands up to the demands of high-torque hand-tool cycles without losing its shape.
• Knurled grip section: The textured band makes the socket easy to handle and position in the work area.
• 1/2" square drive: Connects directly to any standard ratchet, torque wrench, or breaker bar.
• Hex contact: Six-face engagement with the fastener head transmits torque without slipping.
• Mirror-polished exterior: Keeps markings visible and makes the socket straightforward to wipe clean.

Specs & Attributes

• Size: 30mm
• Drive: 1/2"
• Type: Hex
• Max Torque: 569Nm
• Material: Chrome Vanadium (CrV)
• Finish: Mirror polished | Knurled grip section
• Weight: 0.35kg

Typical Applications

• M20 hex head bolts and nuts across automotive and industrial settings
• Axle and drivetrain components on cars and light commercial vehicles
• Suspension strut fasteners with extended threaded shafts
• Heavy plant and agricultural machinery
• Truck and van undercarriage connections

How to Use

• Verify: Confirm the fastener is 30mm across the flats before reaching for this socket.

• Mount: Press the 1/2" square drive securely onto a ratchet, breaker bar, or torque wrench.

• Lower: Drop the socket squarely over the fastener, seating it fully on all six faces.

• Apply: Turn the drive tool in the correct direction to loosen or tighten the fastener.

• Release: Withdraw the socket once the fastener reaches the required torque or is removed.

Frequently Asked Questions (FAQs)

• What is a 30mm socket used for in automotive work?
  A 30mm socket fits M20 hex fasteners and is used on axle components, suspension connections, and drivetrain work. Some vehicles also use 30mm nuts on wheel hubs and bearing assemblies.

• How much torque should I apply through a 1/2" drive chrome socket?
  Always stay within the socket's rated maximum torque. Applying more force than the rating allows risks both tool and fastener damage. Check the specification before using a breaker bar on heavy fasteners.

• What does the mirror-polished finish on a socket do?
  The mirror finish keeps the stamped size markings visible after repeated use. It also makes the surface easier to wipe clean, which matters when sockets sit in tool drawers alongside greasy components.

• What is the advantage of buying an individual socket rather than a full set?
  Individual sockets let you fill a specific gap in an existing kit. You add the exact size needed without paying for sizes you already have or sizes you are unlikely to use on your work.

• How do I confirm the correct socket size for a fastener?
  Measure the fastener across its flat faces using a calliper or try sockets from smallest to largest until you find a snug fit with no play. A socket that wobbles on the fastener is too large.

Summary

The Blue Spot Tools 30mm 1/2" Drive Deep Hex Socket is a CrV steel hand-tool socket rated to 569Nm. The deep profile suits M20 axle, suspension, and drivetrain work where threads project beyond the nut face.