Everbuild Lumberjack 160 Woodbond Wood Flooring Adhesive LJACK16010

Everbuild Lumberjack Woodbond 160 Wood Flooring Adhesive 10 Litre 484937

Barcode 5029347609665

MPN: LJACK16010

Sika Code: 484937

Size: 10 Litre

Colour: Tan

LUMBERJACK 160 Woodbond wood Bond high specification, trowel applied wood flooring adhesive based on a resin and solvent blend, Specifically designed for fixing all types of wooden floors directly onto porous substrates, the Everbuild Lumberjack 160 Wood Flooring Adhesive is a premium choice for professionals and DIY enthusiasts looking to achieve strong, reliable bonds for wood flooring installations. This 10kg adhesive tub is specifically formulated to bond a variety of flooring types, including solid wood, engineered wood, and parquet, to a wide range of substrates such as concrete, screeds, and timber. Its advanced formula offers high strength, flexibility, and moisture resistance, ensuring lasting durability even in challenging environments. With a solvent-free, low VOC composition, Lumberjack 160 is eco-friendly and safe for indoor use, making it ideal for residential, commercial, and industrial projects. Designed for ease of application, it simplifies the installation process while providing professional-grade results. For dependable performance and seamless flooring installations, choose Everbuild Lumberjack 160.

Lumberjack 160 Benefits:

• Water free will not cause warpage or curl of wood blocks and planks. Rapid Setting, Floors may normally be trafficked 12-24 hours after application.
• Will bond wood directly to all common porous subfloors including concrete, wood and porous natural stone floors. Easy application by trowel.
• High strength adhesive. Suitable for use with underfloor heating.

Flooring:

• The wood flooring MUST be acclimatised for several days in the room where it is to be installed. Leave in original packaging during this period.
  
• Application Open bucket and trowel onto floor.
• Spread evenly with a suitable notched trowel at no less than 0.5kg/m to 1.0Kg/m. Do not spread more adhesive than can be covered within 10 to 15 minutes 1m maximum.
• Place planks or blocks into position whilst adhesive is still tacky within 10 minutes tap into final position with mallet and block, Remove uncured adhesive with Wonder Wipes caution - test compatibility with lacquer finished blocks wipes and adhesive first.
• Floor may be sanded and trafficked 12-24 hours after application, depending on site conditions (longer at low temperatures). If subfloor has poor absorbency allow 3 days before sanding and trafficking
• For full surface bonding only. Ensure that the contact faces of the wood elements are fully wetted with adhesive.
  
• Coverage 0.5 to 1.0 kg Litre per m2 depending upon size of notched trowel used and subfloor surface profile.
• For the bonding of long or wide boards or in case of uneven substrates it could be necessary to use a notched trowel with bigger notches avoid hollow sections.

Product Limitations:

• SOLVENT BASED PRODUCTS ARE FLAMMABLE. Keep away from sources of ignition.
• Avoid inhalation of fumes and ensure good ventilation during use and after fixing until product is dry, In confined spaces use plenty of ventilation. If any of the above are an issue use lumberjack 650 flooring adhesive.
• Do not use against bitumen or substrates that bleed oil or plasticizers.
• This product is only suitable for direct applications to subfloors where humidity level is below 2.5%. for applications where humidity level is between 2.5 and 7%, always use Sikabond Rapid DPM Primer over screed as directed. Never apply wooden flooring under any circumstances where humidity level is above 7% check with a moisture detector.
• Moist Floors If moisture levels in sub floor are above those recommended by the flooring manufacturer, a DPM must be used Everbuild 908 DPM is a sandwich damp proof membrane this can be used and then screeded over
• Surface Preparation The surfaces to be glued must be porous, sound, clean, dry and free from dust, grease and other contaminants.
• Existing floors and chipboard must be free from all polish and wax. New concrete must be allowed 4 weeks to dry and mature.

Under floor heating:

• underfloor heating must be turned off 48 hours before and 48 hours after the adhesive has been applied.
  
• Non Porous Surfaces Not suitable for direct application. Prime 1:3 to water: EVERBUILD PVA BOND and screed with a minimum 3mm depth of EVERBUILD SELF LEVEL FLEXIPLUS whilst primer is tacky. Allow to cure for 24 hours or until dry, whichever is longer then proceed as per porous surfaces.

Questions and Answers:

FAQs for Everbuild Lumberjack 160 Wood Flooring Adhesive:

1. What types of flooring is Lumberjack 160 suitable for?
Lumberjack 160 is designed to bond solid wood, engineered wood, and parquet flooring to various substrates.

2. Can it be used with underfloor heating systems?
Yes, Lumberjack 160 is compatible with underfloor heating systems, offering flexibility and durability under temperature changes.

3. What substrates can this adhesive bond to?
It works effectively on concrete, screeds, timber, and other common flooring substrates.

4. Is it safe for indoor use?
Yes, Lumberjack 160 is solvent-free and low VOC, making it environmentally friendly and safe for indoor applications.

5. Does it provide moisture resistance?
Yes, the adhesive has excellent moisture-resistant properties, ensuring a long-lasting bond even in humid conditions.

6. How large is the container?
This product comes in a 10kg tub, suitable for medium to large flooring projects.

7. Does it require priming before application?
No, Lumberjack 160 does not require priming, saving time and simplifying the installation process.

8. How do I apply the adhesive?
Apply the adhesive using a notched trowel, evenly spreading it on the substrate before laying the wood flooring.

9. How long does it take to cure?
The curing time depends on the environment and substrate conditions but typically takes 24 to 48 hours for full strength.

10. Is it suitable for high-traffic areas?
Yes, Lumberjack 160 is formulated for high durability, making it ideal for residential and commercial high-traffic areas.

"Always read the Technical Datasheet prior to first use to ensure you have the correct information and product for your application"

(Please note that tins will get dented in transit and this is not a reason for return please do not purchase tined products if this is an issue for yourself.)

See All Wood Floor Adhesives