Silverline Rotary Steel Twist-Knot 75mm Wire Wheel with a offset 6mm Shank
Barcode: 5055058124586
MPN: 456933
Diameter: 75mm 3 inch
Spindle Size: 6mm
Overview:
The Silverline Tools Rotary Steel Twist-Knot 75mm 3 inch Wire Wheel with Offset 6mm Shank is a drill-mountable wire wheel designed for fast, aggressive cleaning and surface preparation. Made with high tensile twist-knot steel wire (0.5mm diameter), it’s ideal for removing rust, paint and scale, as well as deburring edges and preparing welding seams. The offset wheel design helps improve access to edges and awkward areas, while the 6mm shank fits many power drills and rotary tools that accept a 6mm spindle. Rated to a maximum of 12,500rpm, it’s a practical accessory for metalworking, fabrication and general cleaning tasks.
Key Features
75mm (3") twist-knot steel wire wheel for rapid material removal
Offset wheel design helps improve access on edges and tight areas
High tensile steel wire for aggressive cleaning and longer life
0.5mm wire thickness for effective rust and paint removal
6mm shank for mounting in drills and compatible rotary tools
Ideal for descaling, deburring and weld seam preparation
Suitable for metal and stone cleaning and surface prep tasks
Maximum speed rating of 12,500rpm
Specifications
Brand: Silverline Tools
Product Type: Twist-Knot Wire Wheel (Drill Mounted)
MPN: 456933
Barcode: 5055058124586
Diameter: 75mm (3 inch)
Shank / Spindle Size: 6mm
Wire Type: Twist-knot steel
Wire Diameter: 0.5mm
Maximum Speed: 12,500rpm
Design: Offset
Applications
Removing rust, paint and corrosion from metal
Descaling and cleaning fabrication work
Deburring edges after cutting or drilling
Preparing welding seams and joints
Cleaning metal and stone surfaces (task dependent)
General workshop, maintenance and restoration work
How to Use
Fit the 6mm shank securely into a compatible drill or rotary tool.
Check the tool speed does not exceed 12,500rpm.
Wear suitable PPE (eye/face protection and gloves) and secure the workpiece.
Run the wheel at a controlled speed and apply light, steady pressure.
Keep the wheel moving to avoid gouging and reduce heat build-up.
Clean and store the wheel safely after use.
Silverline 75mm Twist-Knot Wire Wheel 456933 – Key FAQs
What is a twist-knot wire wheel used for?
It’s used for aggressive cleaning, such as removing rust, paint and scale, plus deburring and weld preparation on suitable surfaces.
Will this fit a standard drill?
It has a 6mm shank, so it fits drills and rotary tools that accept a 6mm spindle. Always tighten the chuck securely.
What does the offset design help with?
The offset wheel can improve access to edges, corners and awkward angles compared with a flat wheel design.
What is the maximum RPM rating?
The maximum rated speed is 12,500rpm. Always ensure your tool does not exceed this limit.
Can it be used on stone as well as metal?
It can be used for cleaning and surface preparation on metal and some stone applications, depending on the job and surface condition.
What wire thickness is used?
The wheel uses 0.5mm high tensile steel wire, designed for rapid removal and durability.
What safety precautions should I take?
Use eye/face protection, gloves and suitable clothing. Keep bystanders clear, secure the workpiece, and avoid excessive pressure to reduce wire shedding risk.
| Data | |
| Reference Code | 456933 |
| Type | Offset drill mountable wire wheel |
| Size | 75mm 3 inch |
| Special Features | 6mm offset shank drill mountable |
| Material | Twist Knot Steel Wire |