Silverline Turbo Wave Diamond Stone Grinder Blade Disc 12 inch 300mm 675104

Silverline 12 inch Turbo Wave Diamond Stone Masonry Cutting Disc 300mm x 20mm

Barcode: 5055058133717

MPN: 675104

Overview:

The 12 inch Turbo Wave Diamond Stone Masonry Cutting Disc 300mm x 20mm designed for fast, clean cutting in tough masonry materials, suitable for use with a wide range of petrol, electric and new cordless disc cutters. Featuring a turbo wave segment profile and a castellated continuous rim, it cuts quicker and cleaner than standard diamond discs while helping to clear dust during deeper cuts in concrete. The 7mm deep rim improves cutting life and supports smoother performance across demanding materials such as roof tiles, high-density concrete, kerbstones, paving slabs, bricks and lintels. Suitable for wet or dry cutting, best results are typically achieved with wet cutting to reduce dust and increase blade life.

Key Features

• 300mm (12") turbo wave diamond cutting disc for masonry and stone

• Castellated continuous rim wave-form body aids dust removal

• 7mm deep rim for fast cutting and longer service life

• Cuts quicker and cleaner than standard diamond discs

• Suitable for wet or dry cutting (wet cutting recommended for best results)

• Ideal for deep cuts in concrete and general building materials

• Manufactured and certified to EN13236

• May be supplied in red or blue (colour may vary)

Specifications

• Brand: Silverline

• MPN: 675104

• Barcode: 5055058133717

• Disc Diameter: 300mm

• Bore Size: 20mm

• Max RPM: 5,900rpm

• Plate Thickness: 2mm

• Blade Width: 3.5mm

• Segment / Rim Depth: 7mm

• Segment Form: Turbo wave

• Abrasive Material: Diamond dust alloy

• Abrasive Connection: Diamond impregnated segment

• Construction: Sintered

• Hardened: Yes

• Compliance: EN13236

• Use: Wet or dry (best results with wet cutting)

• Safety: Safety precautions stated on blade

Applications

• Cutting roof tiles and paving slabs

• High-density concrete and kerbstones

• Bricks, blocks and lintels

• Concrete pipes and masonry products

• Reinforced concrete (task dependent and tool compatible)

How to Use

• Check the tool’s maximum speed is compatible (max 5,900rpm for this disc)

• Fit the disc securely to the correct machine using the 20mm bore

• For best performance, use wet cutting where possible to reduce dust and heat

• Allow the disc to cut at its own pace—avoid forcing it through the material

• Make steady, controlled cuts and let the wave profile clear dust during the cut

• Always follow the safety guidance printed on the blade and wear appropriate PPE

12 inch Turbo Wave Diamond Cutting 300mm Disc 675104 – Key FAQs

• What materials can this disc cut?
  It’s designed for masonry and stone cutting, including roof tiles, bricks, patio slabs, kerbstones, concrete products and lintels.

• Can it be used wet or dry?
  Yes. It’s suitable for wet or dry use, but wet cutting is recommended for cleaner cutting, less dust and longer blade life.

• What is the bore size?
  The bore is 20mm, so it must be used with a compatible machine/arbor.

• What does “turbo wave” mean?
  Turbo wave segments are shaped to increase cutting speed and help clear debris, improving performance during tougher cuts.

• Is it certified to a safety standard?
  Yes, it’s manufactured and certified to EN13236.

• Does the disc colour matter?
  No. It may come in red or blue, depending on production batch, but performance/spec remains the same.