Silverline Tungsten Carbide Grinding Disc 115mm 302067

Silverline Tungsten Carbide Grinding Disc 115mm

MPN: 302067

Barcode: 5024763069727

Overview:

The Silverline Tungsten Carbide Grinding Disc 115mm (302067) is an extra-hard angle grinder accessory designed for fast material removal on tough surfaces. Manufactured with brazed tungsten carbide abrasive, it’s ideal for aggressive grinding and cleaning tasks on rough concrete, stone, brick, tiles and fibreglass, and it can also be used for rust removal where suitable. With a 22.2mm bore, it fits most 115mm (4-1/2") angle grinders, offering a practical solution for renovation, surface prep and general maintenance work.

Key Features

• Tungsten carbide grinding disc for fast, aggressive material removal

• Ideal for rough concrete, stone, brick, tiles and fibreglass

• Suitable for rust removal tasks (surface dependent)

• Brazed carbide construction for durability and cutting performance

• Fits most 115mm angle grinders with a 22.2mm bore

• Designed for high speed grinding applications

Specifications

• Brand: Silverline

• Product Type: Tungsten Carbide Grinding Disc

• Disc Size: 115mm

• Bore / Centre Hole: 22.2mm

• Abrasive Material: Tungsten carbide

• Construction Method: Brazed

• Maximum Speed: 13,300rpm

• Compatible Tools: 115mm angle grinders

• Finish: Silver

• MPN: 302067

• Barcode: 5024763069727

Applications

• Grinding and levelling rough concrete and masonry

• Removing surface build-up on brick and stone

• Cleaning and shaping tiles (task dependent)

• Working fibreglass surfaces (with appropriate PPE)

• Removing rust and corrosion from suitable surfaces

• General renovation and surface preparation tasks

How to Use

• Confirm your angle grinder accepts 115mm discs and does not exceed 13,300rpm

• Fit the disc securely using the correct flanges and keep the guard in place

• Wear suitable PPE, especially eye, ear and respiratory protection

• Start the grinder and allow it to reach full speed before contact

• Use controlled pressure and keep the disc moving to avoid gouging

• Stop using the disc if it becomes damaged or performance drops

115mm 4.5" Tungsten Carbide Grinding Disc 302067 – Key FAQs

• What is this grinding disc designed for?

  • It is designed for fast removal and grinding on tough surfaces such as rough concrete, brick, stone, tiles and fibreglass, plus rust removal on suitable materials.

• Will it fit my angle grinder?

  • It fits most 115mm angle grinders that use the standard 22.2mm bore. Always confirm disc diameter and bore size before fitting.

• What is the maximum speed rating?

  • The maximum rated speed is 13,300rpm. Your grinder’s no-load speed must not exceed this rating.

• What does “brazed tungsten carbide” mean?

  • It means the tungsten carbide abrasive is bonded to the disc using a brazing process, helping provide a hard-wearing cutting surface for aggressive grinding work.

• Can it be used for rust removal?

  • Yes, it can be used to remove rust from suitable surfaces, but always test first and avoid using it on delicate materials that could be damaged.

• What safety precautions should I take?

  • Always use the correct guard, wear eye and respiratory protection, and keep a firm two-handed grip. Carbide grinding can generate dust and debris, so safe handling is essential.