Silverline Hand Wood Plane No 5 508824

Silverline Cast Iron Jack Hand Wood Plane No 5

MPN: 508824

Barcode: 5055058148520

Overview:

The Silverline Hand Cast Iron Jack Wood Plane No.5 (508824) is a versatile bench plane designed for general stock removal, flattening and trimming timber before finishing. Built with a stable cast iron body, it offers the weight and rigidity needed for controlled planing, while the rosewood front knob and rear handle provide comfortable handling during longer sessions. Milled sides and a fluted base support smoother travel across the workpiece and help improve accuracy when trueing edges and faces. Fitted with a 2mm high carbon steel blade and a brass adjustment screw, the plane allows straightforward blade setting and quick removal for sharpening and honing—ideal for workshop use on a wide range of woodworking jobs.

Key Features

• No.5 jack plane for general woodworking and stock removal

• Cast iron body provides stability and consistent planing feel

• 2mm high carbon steel blade for durability and effective cutting

• Milled sides for improved accuracy on edges and jointing tasks

• Fluted base helps smooth travel and reduces drag

• Brass adjustment screw for easier blade setting and fine control

• Rosewood handles for comfortable grip and traditional finish

• Suitable for flattening, trimming and preparing timber prior to finishing

Specifications

• Brand: Silverline

• Product Type: No.5 Jack Plane / Bench Plane

• MPN: 508824

• Barcode: 5055058148520

• Body Material: Cast iron

• Blade Material: High carbon steel

• Blade Thickness: 2mm

• Blade Size: 50mm x 2mm

• Adjustment: Brass adjustment screw

• Handles: Rosewood (secured with brass screws)

• Base: Fluted

• Sides: Milled

Applications

• Stock removal and flattening timber

• Trimming and trueing faces and edges

• Correcting minor twist, cupping and bowing in boards

• General workshop planing and preparation before finishing

• Smoothing after rough sizing (with appropriate blade set and technique)

How to Use

• Set the blade depth using the brass adjustment screw for a light or heavier cut.

• Ensure the sole is clean and the blade is sharp before starting.

• Plane with the grain for smoother results, adjusting depth as needed.

• For flattening, work progressively across high spots until the surface is true.

• Retract the blade slightly when not in use and store the plane dry.

• Remove the blade for sharpening and re-set carefully for best performance.

Silverline Wood Plane No.5 508824 – Key FAQs

• What is a No.5 jack plane used for?
  A No.5 jack plane is a versatile general-purpose plane used for stock removal, flattening and trimming timber prior to finer finishing steps.

• What type of blade does this plane use?
  It features a 2mm high carbon steel blade, designed for durability and reliable cutting performance when kept sharp.

• What does a fluted base help with?
  A fluted base can help reduce drag and improve the feel of the plane as it travels over the workpiece, supporting smoother operation.

• Are the sides milled for accuracy?
  Yes, the sides are milled, which helps when using the plane for edge work where squareness and accuracy matter.

• How do I adjust the blade depth?
  Blade depth is adjusted using the brass adjustment screw, allowing you to set a finer cut for smoothing or a deeper cut for stock removal.

• Are the handles comfortable for longer use?
  Yes, it has rosewood handles designed for a secure, comfortable grip during prolonged planing and workshop use.

• Is this plane suitable for finishing work?
  It’s best suited to general planing and preparation. For final finishing, use a very sharp blade, fine settings and good technique, or consider a dedicated smoothing plane.