Silverline Clamping Board Cutting Guide Rail Straight Edge 1270mm 675056

Silverline Straight Edge 1270mm Board Clamping Cutting Guide Rail

Barcode: 5055058111470

MPN: 675056

Overview:

Straight Edge Guide Clamp 1270mm Board Clamping Cutting Guide Rail is a dual-purpose straight edge designed to make accurate cutting and alignment easier. Ideal for trimming door bottoms before hanging and for general sheet and board work, it clamps firmly across the workpiece to create a straight guide for a jigsaw, router or circular saw. It can also apply (light pressure) when gluing multi-panel boards, helping keep panels aligned while the adhesive sets. For hands-free setup, the clamps can be bolted back-to-back to secure the guide to a workbench. Serrated faces improve grip on the material for more stable guiding during use.

Key Features

• Dual-purpose straight edge and light clamp for cutting and alignment tasks

• 1270mm clamp travel for trimming doors and working on boards

• Creates a firm straight guide for jigsaws, routers and circular saws

• Useful for applying light pressure during multi-panel board glue-ups

• Can be bolted back-to-back to secure to a workbench for hands-free use

• Serrated clamping faces improve grip and reduce slipping

• Cam lock clamping method with spring lock adjustment for quick setup

• Ideal for door trimming, sheet cutting and general workshop jobs

Specifications

• Brand: Silverline

• Product Type: Straight Edge Clamping Cutting Guide Rail

• MPN: 675056

• Dual Purpose: Yes (straight edge guide + clamp)

• Clamp Travel: 1270mm

• Jaw Capacity: 1200mm

• Adjustment Method: Spring lock

• Clamping Method: Cam lock, serrated faces

• Hardened: Yes

Applications

• Trimming door bottoms before hanging

• Guiding straight cuts with circular saws on boards and sheet material

• Straight edge guiding for jigsaws and routers

• Aligning panels during glue-ups (light pressure)

• Securing work for cleaner, straighter cutting results

How to Use

• Position the straight edge where you want the cut or alignment line

• Clamp across the board using the spring lock adjustment for quick positioning

• Engage the cam lock to secure the guide firmly in place

• Run your saw, jigsaw or router base against the straight edge for a straight cut

• For glue-ups, apply light pressure only to keep panels aligned while curing

• If needed, bolt clamps back-to-back to secure to a bench for hands-free work

Straight Edge 1270mm Cutting Guide Rail – Key FAQs

• What is this 1270mm straight edge guide best used for?
  It’s ideal for trimming door bottoms, straight cutting boards and sheet material, and guiding power tools like circular saws, jigsaws and routers.

• How does it clamp in place?
  It uses a spring lock adjustment for quick positioning and a cam lock clamping method to hold the guide firmly on the workpiece.

• What jaw capacity does it have?
  The jaw capacity is 1200mm, giving a wide working range for door and board applications.

• Will it straighten warped or bent timber?
  No. It applies light clamping pressure to hold a straight line for guiding tools, but it won’t pull bent timber straight. Use sash clamps for that job.

• Do the jaws grip well on smooth boards?
  Yes. The clamp faces are serrated to improve grip and help reduce slipping during cutting and alignment.

• Can it be used for glue-ups?
  Yes. It’s useful for applying light, even pressure to help keep multi-panel boards aligned while glue cures.

Please note:

Straight edge will only apply enough pressure on the workpiece to keep a straight line when using a power tool and will not pull bent timbers into place, for this purpose use sash clamps these are available up to 1800mm.