Silverline Diamond Core Masonry Drill Bit 117mm x 150mm 675057

Silverline Expert Diamond Core 117mm x 150mm Masonry Drill Bit

MPN: 675057

Barcode: 5055058111838

Silverline Diamond Core Masonry Drill Bit – 117mm x 150mm – 675057 Product Overview The Silverline Diamond Core Masonry Drill Bit, measuring 117mm in diameter and 150mm in length (model 675057), is engineered for professional-grade drilling in a variety of masonry materials, including concrete, bricks, and stone. This robust core drill bit is designed to deliver efficient and precise drilling, making it an indispensable tool for construction projects that require the installation of piping, cabling, and large fixtures. Its diamond-impregnated segments ensure superior cutting performance and enhanced durability, making it ideal for heavy-duty applications.

Premium 117mm wide heavy duty steel body core drill bit with diamond dust cutting segments that are ideal for dry cutting clean holes in masonry surfaces for general building and plumbing use, Core drills bits can be used for things like the creation of holes for plumbing and drainage pipes threw walls, cable runs for electrical wiring, the installation of heating pipe work, or boiler vent piping, ventilation and air conditioning, and can be used with or without lubricant

Key Features:

• Large Diameter: At 117mm, this drill bit is suited for creating substantial openings in masonry for major installations or utility services.
• Extended Length: The 150mm length allows for deep drilling, accommodating thicker materials and structures.
• Diamond Cutting Segments: Provides exceptional cutting power, capable of handling the toughest masonry materials.
• Robust Construction: Built to withstand rigorous use, ensuring longevity even under tough conditions.
• High Compatibility: Designed to fit a wide range of core drilling machines, enhancing its utility across various job sites.

Common Applications:

• Creating pass-throughs for HVAC systems and large plumbing installations in commercial and residential buildings.
• Drilling precise holes for electrical conduit and large wiring setups through concrete walls.
• Facilitating core extraction for material analysis in renovation or historical preservation projects.
• Installing anchoring systems for heavy machinery and structural supports.
• Performing tasks that require precise, large diameter holes in reinforced concrete or stone.

360 Degree Video Demonstration:

Specification and Main Points:

• Size - 117mm x 150mm
• Heavy duty
• Material - Steel 
• Diamond dust cutting segments
• Use with 1/2 inch BSP compatible arbor
• Drills need to be equipped with a safety clutch
• Finish - Painted 
• Hardened - Yes 
• Teeth/Segment size - 5 Teeth - 8.2mm x 3.6mm x 24.0mm
• Method of construction - Extruded, milled, ground, sintered
• Abrasive connection - Sintered 

Warning Do not use with drills set in hammer action this will be counter productive dangerous and will damage the bit

All Sizes Available

Silverline Diamond Core Masonry Drill Bit 117mm x 150mm 675057 FAQs

1. What precautions should be taken when using this core drill bit? Always ensure proper anchoring and stabilizing of the core drill setup to prevent slipping or misalignment. Use appropriate personal protective equipment (PPE), including eye protection, ear protection, and dust masks, to safeguard against flying debris and noise.

2. How do I maintain the diamond core drill bit for optimal performance? Keep the drill bit cool during use by employing adequate water lubrication, which also helps to reduce dust. After use, clean the bit thoroughly to remove debris, and store it in a dry environment to prevent rust and prolong its lifespan.

3. Can this drill bit be used on reinforced concrete? Yes, this diamond core drill bit is capable of drilling through reinforced concrete. However, the presence of rebar may slow down the drilling process and can wear down the diamond segments faster.

4. Is this drill bit suitable for dry drilling? While it is designed primarily for wet drilling to ensure cooling and minimize dust, it can perform dry drilling in situations where water application is not feasible. Be mindful that dry drilling may increase wear on the diamond segments and reduce the bit’s overall lifespan.

5. How often should the diamond segments be replaced? The lifespan of the diamond segments depends on the type and hardness of the material being drilled, as well as the frequency of use. Inspect the segments regularly and replace them when they show signs of significant wear or when drilling performance declines.

The Silverline Diamond Core Masonry Drill Bit 117mm x 150mm – 675057 is a powerful tool for any construction or renovation project requiring high-quality, precise drilling through tough masonry materials. Its robust design and diamond-enhanced cutting ability make it an essential component in the toolkit of any serious contractor or builder.

Silverline Tools Guarantee:

Hand tools are guaranteed forever other tools are guaranteed for 3 years unless stated. This simply means all hand tools are guaranteed to be free of defects caused by faulty materials or workmanship from now until the end of time. Naturally, fair wear and tear is not covered so do not expect blades to stay sharp forever.

To Register your product. Click here Silverline Tools Guarantee this must be done to extend your Silverline Guarantee.