Silverline Concrete Stone Diamond Angle Grinder Cutting Blade 150mm 868619

Silverline Concrete Stone Diamond Angle Grinder and Circular Saw Cutting Blade 150mm 868619

MPN: 868619

Barcode: 5055058144737

Product Overview:

The Silverline 150mm 6 inch Diamond Cutting Blade is engineered for clean, efficient cutting of hard construction materials such as concrete, stone, brick, and masonry. With an industrial-grade continuous rim and high-performance diamond grit edge, this blade delivers precision results while maintaining durability during tough grinding and cutting tasks. Designed for compatibility with most 115mm angle grinders, it’s an essential tool for professionals and DIYers tackling demanding material-cutting applications.

• This Blade has 7mm high segments for fast cutting and a long life, these give excellent cutting speed and blade life balance.
• Compatible with 22mm bore angle grinders.
• Wet or dry use. Optimum results are achieved if used wet.

For general building use on:

• Stone.
• Concrete.
• Clay pipes.
• Brick.
• Roof tiles.
• Patio slabs.
• Lintels and more
• Max 10,100rpm.
• Manufactured and certified to EN13236.
• 22.23mm bore.

Available Sizes and MPN's in This Cutting Disc:

• 115mm - 394979
• 125mm - 633624
• 150mm - 868619
• 230mm - 589673

Key Features:

• 150mm Diameter – Fits standard 6-inch angle grinders and saws

• Continuous Rim Design – Enables smooth and precise cuts with reduced chipping

• Diamond Grit Edge – Offers long-lasting performance on dense materials

• Bore Size: 22.2mm – Suitable for most common grinder models

• Max RPM: 10,100 – Safe high-speed operation for rapid material removal

Applications:

• Cutting concrete slabs, tiles, and paving blocks

• Trimming natural stone or man-made masonry materials

• Shaping bricks, facing stones, and granite pieces

• Ideal for use on building sites, home renovations, and hard landscaping

Specifications:

• Product Code: 868619

• Blade Diameter: 150mm

• Bore: 22.2mm

• Max Speed: 10,100 RPM

• Blade Type: Diamond cutting, continuous rim

• Material Compatibility: Concrete, stone, masonry, brick

Frequently Asked Questions:

1. Can this blade cut reinforced concrete?
   It is suitable for general concrete and stone, but not recommended for heavily reinforced concrete with embedded steel.

2. Is water cooling required?
   This blade can be used dry or wet, but using water can extend the blade’s life and reduce dust.

3. Will this blade work with a tile cutter?
   Only if the cutter accepts 115mm blades and matches the bore size; otherwise, it’s best suited to angle grinders.

4. Is it safe for indoor use?
   Yes, but ensure proper dust control and ventilation when cutting indoors.

5. Does it require special mounting hardware?
   No, it mounts directly to standard 22.2mm grinder spindles without adapters.

6. Can it be used for grinding as well?
   This is a cutting blade—not designed for grinding or side-pressure use.

7. How long does the blade typically last?
   Lifespan varies by material hardness and frequency of use, but diamond edges generally offer extended durability over standard abrasives.

8. Does it cut dry concrete effectively?
   Yes, it performs well on dry concrete but using water will minimise dust and wear.

Always use safety glasses or goggles when using saws.

Take a look at the full range of abrasive and cutting products

Silverline Tools Guarantee:

Hand tools are guaranteed forever other tools are guaranteed for 3 years unless stated. This simply means all hand tools are guaranteed to be free of defects caused by faulty materials or workmanship from now until the end of time. Naturally, fair wear and tear is not covered so do not expect blades to stay sharp forever.

To Register your product. Click here Silverline Tools Guarantee this must be done to extend your Silverline Guarantee.