Silverline HD Stone Angle Grinder Cutting Disc - 115mm 271797

Silverline HD Stone Angle Grinder Cutting Disc - 115mm 271797

Barcode: 5024763124686

MPN: 271797

Overview:

The Silverline HD Stone Angle Grinder Cutting Disc 115mm (271797) is a premium heavy duty masonry disc designed for fast, accurate cutting through hard building materials. Manufactured from silicon carbide and reinforced with fibreglass mesh, it offers dependable strength and long service life during demanding site and workshop use. Ideal for cutting stone, slabs, tiles, brick and block, this disc is suitable for standard 4-1/2 inch (115mm) angle grinders with a 22.3mm centre bore. Certified to EN12413 and MPA approved, it’s a reliable choice when you need clean, confident cuts on masonry materials.

Key Features

• Heavy duty stone and masonry cutting disc for angle grinders

• Silicon carbide abrasive for strong cutting performance

• Fibreglass mesh reinforced for added safety and durability

• Designed for long life and fast, accurate cutting

• Suitable for stone, slab, tile, brick and block

• Manufactured and certified to EN12413 with MPA approval

• Fits standard 115mm (4-1/2") angle grinders

Specifications

• Brand: Silverline

• Product Type: Stone/masonry cutting disc

• MPN: 271797

• EAN / Barcode: 5024763124686

• Disc Diameter: 115mm (4-1/2")

• Disc Thickness: 3mm

• Bore Size: 22.3mm (22.23mm typical)

• Abrasive Type: Silicon carbide

• Reinforcement: Fibreglass mesh

• Standard / Approval: EN12413, MPA approved

Applications

• Cutting stone, paving slabs and masonry units

• Trimming bricks and concrete blocks

• Cutting wall and floor tiles (material dependent)

• General building and renovation cutting tasks

• Site work and workshop fabrication involving masonry materials

How to Use

• Check the disc size and bore match your 115mm angle grinder

• Inspect the disc for damage before fitting

• Fit the disc securely and ensure the guard is in place

• Wear appropriate PPE (eye/face, gloves and dust protection)

• Cut with steady pressure—do not force the disc

• Allow the disc to stop fully before putting the grinder down

Silverline HD Stone Cutting Disc 115mm 271797 – Key FAQs

• What materials is this disc designed to cut?

  • It’s designed for masonry cutting, including stone, slabs, tiles, brick and block, providing fast, accurate cuts in common building materials.

• Will it fit my angle grinder?

  • It’s suitable for 115mm (4-1/2") angle grinders with a 22.3mm centre bore. Always confirm your grinder’s disc size and bore.

• What is the disc thickness?

  • The disc is 3mm thick, offering a good balance of durability and cutting performance for heavy duty masonry work.

• What does EN12413 and MPA approved mean?

  • EN12413 is a recognised safety standard for bonded abrasives, and MPA approval indicates the disc has been tested and certified to meet those requirements.

• Is it reinforced?

  • Yes, it’s fibreglass mesh reinforced to improve strength and safety during cutting.

• Is this disc suitable for metal cutting?

  • No, this is a stone/masonry disc (silicon carbide). For metal, use a disc specifically rated for metal cutting.