Soudal Soudafix 2 Part Chemical Anchor

Soudal Soudafix 2 Part Professional Quality Chemical Anchor chemical metal fixing anchoring adhesive styrene and styrene free options including mixing nozzle all are available here at Sealants and Tools Direct. Chemical anchors give you the flexibility to adapt the load capacity according to the requirements of the application on site, The load capacity can be increased easily by increasing the anchoring depth or diameter of the drill hole whenever required, All the chemical anchors soudafix P300-ST styrene, P300-SF styrene free and Soudafix VE400-SF syrene free are available in singles and in discounted box options.

Soudal soudafix chemical anchors do no damage to the substrate and allow for closer to edge fixings if necessary but please remember with close to edge fixing that the fixing is only as strong as the concrete or substrate the chemical anchor is infact stronger in most cases than the substrate. Because chemical anchors styrene or styrene free do not expand after application like a conventional fixing method they put no additional stress on the concrete or substrate around the hole, the load is also evenly distributed across the complete surface area of the driller hole so larger than the threaded rod or anchor fixing, this makes it possible to fix close to the edge of the concrete without the risk of cracking, also gives a better fixing into softer materials or frail old stone and cement walls.

When using the Soudal soudafix chemical anchor drill the hole to the required depth blow out the hole and also wire brush the hole this is done to remove as much dust as possible to give maximum bonding strength the less dust the stronger the fixing, when the soudafix chemical anchor is first used discard the first material from the mixing nozzle until the material is of one colour with no light streaks, then starting from the bottom of the hole pump the adhesive almost filling the entire hole, the nozzle is slowley withdrawn as you pump this will guarantee that your fixing is airtight and waterproof, some chemical anchor will be expelled from the hole when the threaded bar or chemical anchor fixing is inserted, this will also stop water from sitting in and around the metal fixing preventing rusting out of the fixing.

Soudal chemical anchors soudafix P300-ST styrene, P300-SF styrene free and Soudafix VE400-SF syrene free are available in singles and in full box options tubes come with mixing nozzles additional nozzles are available. These are available in 280ml - 300ml cartridges which fit into a standard strong sealant gun and 410ml which fit into a chemical anchor gun.