Silverline Mechanical Socket Universal Joint Adaptor 3/8 inch 993028

Silverline Mechanical Socket Universal Joint Adaptor 3/8 inch

Barcode: 5055058116734

MPN: 3/8 inch - 993028

Overview:

The Mechanical Socket 3/8" Universal Joint Adaptor designed to improve access when a straight extension or socket won’t line up with the fastener. Fitting between your 3/8" drive ratchet and socket (or extension), the joint allows a flexible working angle so you can turn nuts and bolts in awkward, offset or confined spaces. Ideal for maintenance, automotive jobs and general workshop use, it helps you work around obstructions and reach fixings tucked behind pipework, panels or framework without constantly changing tools or rounding fasteners through poor alignment.

Key Features

• Adds flexible angle movement to a 3/8" socket setup

• Helps access awkward, offset and restricted fasteners

• Fits between ratchet, extension bar and socket as needed

• Improves alignment to reduce slipping and rounding risk

• Ideal for workshop, automotive and maintenance tasks

• Compact accessory to keep in toolboxes and service kits

Specifications

• Brand: Silverline

• Product Type: Socket universal joint adaptor

• Drive Size: 3/8" drive

• Product Code: 993028

• Compatibility: 3/8" drive ratchets, extensions and sockets

Applications

• Automotive engine bay and underbody fasteners

• Working around pipework, brackets and obstructions

• Maintenance tasks in tight cupboards and service voids

• Workshop socket work where straight access isn’t possible

• Assembly and repair jobs with recessed or offset fixings

How to Use

• Select a 3/8" drive ratchet (or breaker bar) and the required socket

• Fit the universal joint between the drive tool and socket/extension

• Align the socket onto the fastener, allowing the joint to angle as needed

• Apply steady turning force while keeping the socket fully seated

• Reposition the angle as required to maintain control and avoid slipping

Universal Joint Socket Adaptor 3/8 Inch – Key FAQs

• What does a 3/8" universal joint adaptor do?
  It lets your socket work at an angle, helping you reach fasteners that aren’t in a straight line with your ratchet, especially in tight or obstructed spaces.

• Will this fit any 3/8" drive ratchet and socket?
  Yes, it’s designed for standard 3/8" drive tools and accessories, so it should work with most 3/8" ratchets, extension bars and sockets.

• Is a universal joint better than a wobble extension?
  A universal joint typically gives a greater angle range, while a wobble extension offers a smaller controlled offset. The best choice depends on access, clearance and control needed.

• Can I use this with an impact wrench?
  Only if it’s specifically rated for impact use. Standard hand-socket universal joints aren’t always suitable for impact tools, so check your setup to avoid breakage.

• How do I stop the socket slipping off the nut or bolt?
  Keep the socket fully seated, use steady pressure, and reduce the angle where possible. Excessive angle increases the chance of cam-out, especially on tight fasteners.

• What jobs is this adaptor most useful for?
  It’s ideal for automotive repairs, maintenance and workshop tasks where pipework, panels or framework block straight access, letting you turn fasteners with fewer tool changes.