Silverline SDS Plus Masonry Drill Bit 12mm x 210mm 892541

Silverline SDS Plus Masonry Drill Bit 12mm x 210mm

Barcode: 5060012961091

MPN: 892541

Size: 12mm wide 210mm long

Overview:

SDS Plus 12mm x 210mm Masonry Drill Bit 892541 designed for fast, clean drilling in tough materials including concrete, brick, masonry block and stone. Built with a tungsten carbide tip for long-lasting cutting performance, it also features a double-flute spiral to clear dust efficiently, helping you drill smoother and reduce clogging. With an SDS Plus shank for a secure fit and strong power transfer, it’s a dependable choice for trades and DIY projects where accuracy and durability matter.

Key Features

• 12mm x 210mm size for common fixing and installation work

• Tungsten carbide tip for strong wear resistance in masonry materials

• Double flute design helps remove dust quickly for smoother drilling

• SDS Plus shank for secure engagement and reliable power transfer

• Suitable for drilling concrete, brick, lightweight block and stone

• Ideal for anchors, wall plugs, brackets, framing fixings and general site tasks

Specifications

• Brand: Silverline

• MPN: 892541

• SKU/Barcode: 5060012961091

• Diameter: 12mm

• Overall Length: 210mm

• Shank Type: SDS Plus

• Tip Type: Tungsten carbide

• Flutes: Double flute

Applications

• Drilling holes for wall plugs, anchors and fixings in masonry

• Installing brackets, rails, frames and supports into concrete and brick

• General construction, renovation and maintenance drilling tasks

• Suitable for trade use and DIY improvement projects

How to Use

• Insert into an SDS Plus rotary hammer and lock into place

• Start the hole steadily to prevent wandering, then increase speed as needed

• Use consistent pressure—avoid forcing the bit to reduce wear and heat

• Withdraw occasionally to clear dust, especially in deeper or denser materials

• Keep the bit straight and avoid levering inside the hole for best results

SDS Plus Masonry Drill Bit 12mm x 210mm – Key FAQs

• What materials can this drill bit be used on?
  It’s suitable for concrete, brick, block and stone, making it ideal for most masonry drilling jobs.

• Will it fit a standard drill chuck?
  No this is an SDS Plus bit and requires an SDS Plus drill/rotary hammer (or a suitable SDS adaptor).

• What does the double flute design do?
  It improves dust removal while drilling, helping the bit cut more efficiently and reducing binding.

• Is 210mm the working depth?
  210mm is the overall length. Actual drilling depth will be slightly less, depending on the machine’s chuck and how the bit seats.

• Should I use hammer mode?
  Use the correct masonry setting on your SDS machine (typically rotary hammer). Avoid using it on materials it’s not designed for, such as metal or wood.