Silverline Sanding Belts 75mm x 457mm 5 Pack 60g 185706

Silverline Sanding Belts 75mm x 457mm 60g Pack of 5

MPN: 185706

Barcode: 5060012966843

Overview:

The Silverline 60 Grit Sanding Belts 75mm x 457mm 185706 the 60 grit grade is best suited for fast controlled sanding and surface preparation on all belt sanders that use a 75mm x 457mm Belt. Suitable for Silverline 457mm belt sanders and any other make that uses a 75mm x 457mm belt, these belts feature high-quality aluminium oxide abrasive with a phenolic resin bonding agent and heavy-duty cloth backing for long life and dependable performance. The closed coat finish provides a high removal rate for stripping and shaping work, while the fully top-skived joint helps reduce chatter for smoother running and improved control. Ideal for stripping, sanding and finishing on wood, paint, varnish, plastics, plaster, composites and metal.

Key Features

• Coarse 60 grit for rapid sanding and surface preparation

• Aluminium oxide abrasive for consistent cutting performance

• Phenolic resin bond for durability and heat resistance

• Heavy-duty cloth backing for strength and tear resistance

• Closed coat finish for high removal rate and efficient sanding

• Fully top-skived joint helps reduce chatter during use

• Fits all 75mm x 457mm belt sanders

• Pack of 5 for workshop and site use

Specifications

• Brand: Silverline

• MPN: 185706

• Barcode: 5060012966843

• Belt Size: 75mm x 457mm

• Grit: 60 grit

• Abrasive Material: Aluminium oxide

• Bonding Agent: Phenolic resin

• Backing: Heavy-duty cloth backing

• Coat Type: Closed coat

• Joint Type: Fully top-skived (reduced chatter)

• Quantity: Pack of 5

Applications

• Stripping and levelling rough timber

• Removing paint and varnish from flat surfaces

• Shaping and preparation on boards and panels

• Sanding composites and plastics (task dependent)

• Metal sanding and surface clean-up (task dependent)

How to Use

• Confirm your belt sander takes 75mm x 457mm belts

• Fit the belt in the correct direction (if marked) and tension as per tool instructions

• Sand with steady, even passes—avoid excessive pressure

• Keep the sander moving to prevent gouging and heat build-up

• Progress to finer grits for smoother finishing where required

• Clean belts when they load up using an abrasive cleaning block

Grit Guide

40 grit is a coarser abrasive 240 grit is a finer abrasive.

Silverline 75mm x 457mm 60g Sanding Belts – Key FAQs

• What is 60 grit best used for on a belt sander?
  60 grit is a coarse abrasive ideal for fast preparation—removing roughness, stripping coatings and levelling surfaces before moving to medium and fine grits.

• Will these belts fit my belt sander?
  They’re suitable for any belt sander that uses 75mm x 457mm belts, including Silverline 457mm belt sanders. Check your current belt size to confirm compatibility.

• What does “closed coat” mean on sanding belts?
  Closed coat means more abrasive grain coverage on the belt surface, giving a higher removal rate and efficient sanding, especially on timber and harder materials.

• What is the benefit of a top-skived joint?
  Top-skiving reduces the bump at the belt join, helping the belt run smoother with less chatter and improving control during sanding.

• How can I extend the life of sanding belts?
  Use light pressure, keep the sander moving, and clean the belt when it loads up. An abrasive cleaning block removes clogging simply and helps restore cutting action.

• What grit should I use after 60 grit?
  Move to 80 grit for general smoothing, then 120 grit (or higher) for finer preparation, depending on the finish you want.

By using an abrasive cleaning block you can extend the usability and life of the sanding belts by removing the clogging this is a simply and efficient method.