Silverline Sander Sanding Belts 100mm x 610mm 60 Grit 5pk 196070

Silverline Sander Sanding Belts 100mm x 610mm Pack of 5

Abrasive: 60 Grit

Fits all: 100mm x 610mm Electric Belt Sanders.

MPN: 196070

Barcode: 5060012966720

Overview:

The Silverline Sander Sanding Belts (100mm x 610mm) 60 Grit 196070 are designed for fast, controlled sanding and surface preparation with compatible electric belt sanders. Made from flexible, durable aluminium oxide abrasive and fully resin bonded for improved wear life, these belts are ideal for coarse sanding tasks where you need efficient material removal. Suitable for sanding wood, paint, varnish, plastics, plaster and light metal, they’re a practical choice for workshop, site and renovation jobs. Belt sanding spreads wear evenly around the continuous loop, helping the abrasive last longer than conventional flat sheets on larger surfaces and longer passes. Supplied in a convenient pack of 5 and sized to fit all 100mm x 610mm belt sanders.

Key Features

• Coarse 60 grit for rapid sanding and preparation

• Aluminium oxide abrasive for reliable cutting performance

• Fully resin bonded construction for durability under load

• Designed to fit all 100mm x 610mm electric belt sanders

• Suitable for wood, paint, varnish, plastics, plaster and light metal

• Continuous belt format distributes wear for longer usable life

• Pack of 5 for regular use and better value

Specifications

• Brand: Silverline

• MPN: 196070

• Barcode: 5060012966720

• Belt Size: 100mm x 610mm

• Grit: 60 grit

• Abrasive Material: Aluminium oxide

• Bond Type: Fully resin bonded

• Quantity: Pack of 5

• Compatibility: 100mm x 610mm electric belt sanders

Applications

• Coarse sanding and levelling of timber

• Removing old paint and varnish from flat surfaces

• Surface preparation on boards, doors and panels

• Smoothing plaster and filler repairs (light work)

• Light metal sanding and surface clean-up (task dependent)

How to Use

• Confirm your belt sander takes 100mm x 610mm belts

• Fit the belt in the correct direction (if marked) and tension as per tool instructions

• Sand using steady, even passes—avoid excessive pressure

• Keep the sander moving to prevent gouging and heat build-up

• Progress to finer grits (80 then 120) for a smoother finish

• Use a sanding belt cleaning block to remove clogging and extend belt life

How The Grits Work

• 40 Grit – Very Coarse

• 60 Grit – Coarse

• 80 Grit – Medium

• 120 Grit – Fine

Other Abrasive Grits

• 40 Grit – 730880

• 80 Grit – 363320

• 120 Grit – 846448

Silverline 100mm x 610mm 60 Grit Sanding Belts – Key FAQs

• What is 60g best used for on a belt sander?
  60 grit is a coarse abrasive used for fast preparation work—levelling timber, stripping coatings and removing material quickly before refining with medium and fine grits.

• Will these belts fit my belt sander?
  They’re designed for any belt sander that uses 100mm x 610mm belts. Check your existing belt size or tool manual to confirm compatibility.

• Why do sanding belts often last longer than flat sandpaper?
  Because the abrasive runs in a continuous loop, wear is spread evenly around the belt, which can improve durability on larger sanding tasks.

• Can these belts be used on paint and varnish?
  Yes. They’re suitable for sanding paint and varnish, especially for stripping and preparation. Follow up with 80/120 grit to refine the surface for finishing.

• How can I extend belt life?
  Use light pressure, keep the sander moving, and clean the belt when it loads up. A belt cleaning block can remove clogged debris and help restore cutting performance.

• What grit should I use after 60 grit?
  Move to 80 grit for general smoothing, then 120 grit for finer preparation before painting, varnishing or applying topcoats.

See the complete Abrasives and Glass Paper & Sanding Belts.