Silverline Rotary Tool Brass Wire Brush 3pc Mixed Set 763601

Silverline Rotary Tool Brass Wire Brush 3 Piece Mixed Set

MPN: 763601

Barcode: 5055058171443

Overview:

Rotary Tool Brass 3 Piece Wire Brush Set is a handy accessory kit for cleaning, dusting, polishing and light surface preparation with a rotary tool. The soft brass wire bristles are ideal where you want effective cleaning with a gentler touch, making them suitable for working on metals and alloys as well as more delicate surfaces such as ceramics and tiles. Supplied with point, cup and wheel brush shapes, the set helps you tackle everything from tight crevices to flat areas and edges. Compatible with most manufacturers of rotary tools, 3.17mm mandrel for secure fitting and is rated to a maximum of 15,000rpm.

Applications

• Cleaning and polishing small metal components and fixings

• Removing light oxidation, dirt and residue (task dependent)

• Detail cleaning in grooves, corners and hard-to-reach areas

• Surface preparation on suitable materials before finishing

• Light cleaning on ceramics/tiles where a softer brush is preferred

Key Features

• 3-piece mixed brass wire brush set for rotary tools

• Includes point, cup and wheel brushes for versatile access

• Soft brass bristles for cleaning and polishing with reduced surface marking

• Ideal for detail work, crevices, edges and flat areas

• Compatible with most rotary tools including Silverline, GMC and Dremel

• Supplied with 3.17mm mandrel for secure attachment

• Maximum speed rating 15,000rpm for safe, efficient use

How to Use

• Select the brush type best suited to the area (point, cup or wheel)

• Fit the brush/mandrel into your rotary tool and tighten securely

• Set a suitable speed and stay within 15,000rpm maximum

• Use light pressure and keep the brush moving for an even result

• Brush away debris regularly and wear eye protection during use

Rotary Tool Brass Wire Brush – Key FAQs

• What brush shapes are included in this set?
  The set includes a point brush for detail and crevices, a cup brush for corners and curved areas, and a wheel brush for edges and flatter surfaces.

• Will these fit my rotary tool?
  They’re compatible with most rotary tools, including Silverline, GMC and Dremel. Check your tool accepts a 3.17mm mandrel/shank before use.

• What is the maximum safe speed?
  The brushes are rated to a maximum of 15,000rpm. Do not exceed this speed and always match speed to the task and material.

• Are brass wire brushes less aggressive than steel?
  Yes, brass is generally a lot softer than steel, making it a better choice where you want effective cleaning with reduced risk of surface scratching.

• Can I use these on tiles or ceramics?
  They can be used for light cleaning, but always test on an inconspicuous area first and use gentle pressure to avoid marking delicate finishes.

• What safety gear should I use?
  Always wear eye protection. A dust mask and gloves are recommended depending on the material being cleaned and the debris produced.