Silverline Diamond Core Drill Set 28mm 52mm 107mm 7pc Kit 868543

Silverline Diamond Core Drill Set - 28mm, 52mm, and 107mm, 7 Piece Kit

Product Code: 868543

Barcode: 5055058113726

Overview:

The Silverline 7 Piece Diamond Core Drill Set is designed for fast, clean hole cutting in masonry, brick and block, making it ideal for plumbing, electrical and general building work. With three core sizes – 28mm, 52mm and 107mm – plus both SDS+ and hex arbours, it covers a wide range of dry core drilling tasks on site or for serious DIY projects.

Heavy-duty steel bodies with diamond dust segments provide reliable cutting performance and durability, while the full kit is supplied in a sturdy blow-moulded carry case to keep everything organised and ready for the next job.

Key Features

• 7 piece diamond core drill kit for clean holes in masonry and brick

• Three core sizes: 28mm, 52mm and 107mm for common pipe and cable runs

• Heavy-duty steel cores with diamond dust segments for improved cutting life

• Suitable for dry core drilling in walls and masonry (not for reinforced concrete)

• Includes SDS+ and hex arbours for use with a range of compatible drills

• Pilot drill bit aids accurate starting and positioning

• Drift key included for safe and easy removal of cores from the arbor

• Supplied in a robust blow-moulded storage case for easy transport and organisation

What’s Included

• 1 x 28mm diamond core drill

• 1 x 52mm diamond core drill

• 1 x 107mm diamond core drill

• 1 x SDS+ arbor

• 1 x Hex arbor

• 1 x Pilot drill bit

• 1 x Drift key

• 1 x Blow-moulded carry case

Typical Applications

• Drilling holes in brick, block and masonry for water pipes and waste pipes

• Creating cable routes for electrical installations and conduit

• Ventilation and extractor fan openings (using suitable core size)

• General building, renovation and first-fix work where clean holes are required

How to Use

• Select the correct core size for the job and attach it firmly to the appropriate SDS+ or hex arbor.

• Fit the pilot drill bit into the arbor to help start the hole accurately.

• Insert the assembled core into a compatible drill (preferably with a clutch and low-speed setting).

• Mark the hole centre, hold the drill firmly and start slowly, allowing the pilot bit to establish the hole before applying more pressure.

• Drill using a steady feed rate, taking breaks as needed to avoid overheating the core.

• After drilling, remove the core from the arbor using the supplied drift key if required.

Silverline Tools Guarantee:

This Silverline Diamond Core Drill Set is covered by the Silverline Tools Forever Guarantee against defects in materials or workmanship when used correctly (normal wear and tear of cutting segments is not covered). To validate and extend your guarantee, register the product online via the Silverline Tools Guarantee portal.