Silverline Tools Air Line Brad Nailer Nail Gun 50mm 868544

Silverline Tools Air Line Brad Nailer Nail Gun 50mm

Product Code: 868544

Barcode: 5055058122032

Overview:

The Silverline Air Line Brad Nailer 50mm is a lightweight, easy-handling pneumatic nail gun designed for precise second-fix work. Ideal for fixing trims, mouldings, panelling and other light joinery tasks, it fires 18 gauge brads from 15mm up to 50mm in length, giving you plenty of flexibility on site or in the workshop.

With a durable aluminium body, soft-grip handle and safety trigger, it combines reliability, comfort and safe operation. Low air consumption and a simple 1/4" quick connector make it a practical choice for use with most DIY and small workshop compressors.

Key Features

• Fires 18 gauge brad nails from 15mm to 50mm in length

• Lightweight aluminium body for easier handling and reduced fatigue

• Soft-grip rubber handle for comfort during extended use

• Safety trigger system helps prevent accidental firing

• Works up to approx. 7.5 bar (108 psi) for consistent driving power

• Efficient air consumption of around 4–6 cfm (approx.)

• Supplied with 1/4" quick connector and small bottle of air tool oil to get started

Specifications

• Brand: Silverline Tools

• Product Type: Air line brad nailer (pneumatic)

• Nail Type: 18 gauge brad nails

• Nail Length Range: Approx. 15mm – 50mm

• Maximum Operating Pressure: Up to 7.5 bar (108 psi)

• Air Consumption: Approx. 4–6 cfm (depending on use)

• Body Material: Lightweight aluminium

• Handle: Soft-grip rubberised handle

• Included Accessories:

  • 1 x 1/4" quick connector

  • 1 x Small bottle of air tool oil

• Typical Use: Second fix carpentry, trims, mouldings, panelling and light joinery

Applications

• Fixing skirting boards, architraves and door linings

• Attaching decorative trims, picture rails and mouldings

• Panelling and cladding work on walls and ceilings

• Light joinery, cabinets, frames and general second-fix work

• Workshop and DIY projects where neat, pin-style fixings are needed

How to Use

• Connect the 1/4" quick connector to a suitable air hose and compressor set within the recommended pressure range.

• Load the correct 18 gauge brad nails (15–50mm) into the magazine, ensuring they sit properly.

• Add a few drops of air tool oil into the air inlet as part of routine lubrication, following the instructions.

• Press the nose of the nailer firmly against the workpiece, then squeeze the trigger to fire a nail.

• Always keep the tool pointed safely away from yourself and others, and disconnect the air supply before reloading, adjusting or storing.

Silverline Tools Guarantee

This Silverline Air Line Brad Nailer is covered by a 3 Year Guarantee against defects in materials or workmanship when used correctly (fair wear and tear excluded).
To activate and extend your guarantee, register the product online via the Silverline Tools Guarantee portal.