Bond it Sausage Foil Sealant - Adhesive Barrel Gun 600ml Extruder BD600SG

Bond It DIY Barrel Sausage Sealant Gun and Adhesive Applicator 600ml Foil Extruder Gun BD600SG

Barcode: 5060021366658

Model: BD600SG

Size: 600ml

Product Overview:

The Bond It Barrel gun is designed for use with foil packs it has an enclosed aluminium barrel a 600ml capacity extruder gun, the bond it barrel gun also comes complete with a standard metal plunger that allows for a cartridge to be used in the gun and also a plastic plunger that allows for a foil to be used in the gun making this gun a 2 in 1sealant and adhesive applicator gun.

This barrel gun Will accept up to 600ml - 15 inch foil sausages and 310ml cartridges.

Supplied with 1 nozzle and 2 plungers these plungers are already attached to the main rod of the gun to use with a 310ml tube simply remove the plastic plunger leaving the metal plunger.

Please note this very well price Budget guns is primarily for DIY and occasional Professional use.

How to use a Manual Sealant / Adhesive Extruder Barrel Gun:

Barrel or bulk guns are easy to use with foil sausages.

1. Firstly, remove the end cap press the rear thumb release and pull back the bar by grabbing the end with the other hand.
2. Now hold the gun by the neck and insert the foil.
3. Grab hold of the knot at the end of the foil and simply cut that off with side cutters ( this is the cleanest way to do this ), you can use a knife but at some stage you will make a mess, the gun can be held between the knees if required.
4. Now put on the end cap with nozzle inserted onto the gun.
5. Squeeze the trigger to put pressure on the nozzle cut to size and away you go.
6. To release pressure in the gun simply press the thumb leaver.
7. When you come to the end of the sausage simply remove the end cap ensuring not to get product onto the threads, if this does happen use Geocel The Works to remove it, and discard the empty foil to landfill.