Sika Sikafloor 132 Rapid Setting Self Levelling Compound 16kg 767210

Sika Sikafloor 132 Rapid Setting Self Levelling Compound 16kg 767210

Barcode: 7612895935782

MPN: 767210

Size: 16kg Bag

Colour: Grey

Product Overview:

Sika Sikafloor 132 is a high-performance, rapid-setting self-levelling compound designed for smoothing and levelling interior floors before applying final floor coverings the same day such as tiles, vinyl, laminate, or carpet.Supplied in a 16kg bag, this compound is ideal for both domestic and commercial applications where speed and performance are essential.It provides a smooth, even surface with minimal shrinkage and excellent adhesion to concrete, screed, and other common subfloors.

Key Features:

• Rapid-setting formula – walkable 30 minutes at 3mm
• Smooth, self-levelling finish
• Suitable for use under most types of floor coverings
• Excellent adhesion to concrete and screeds
• Low shrinkage and high strength
• Easy to mix and apply
• Ideal for residential and commercial floors

Applications:

• Levelling uneven internal floors
• Preparing subfloors before tiling, carpeting, or laying vinyl/laminate
• Use in kitchens, bathrooms, offices, and other interior spaces
• Suitable for underfloor heating systems (once cured) check data sheet for full details.

Specifications:

• Product Code: 767210
• Weight: 16kg
• Setting Time: Walkable in approx.30min Plus
• Coverage: Approx.3m² at 3mm thickness (depending on substrate)
• Application Thickness: Typically 2mm to 10mm in one layer
• Application Tools: Trowel, mixing paddle, and spike roller
• Interior Use Only
• Floor Covering applications from 45min

Frequently Asked Questions:

• How long before I can walk on the floor after applying? The surface is walkable after approximately 30 minute's under normal conditions.
• Can this be used over underfloor heating systems? Yes, once fully cured, it's suitable for use with underfloor heating see data sheet
• What floor coverings can be used over this compound? Suitable for vinyl, laminate, carpet, tile, and more once fully dry.
• Can I apply it to timber floors? No, it is intended for solid subfloors such as concrete or screed.
• Is it suitable for external use? No, Sikafloor 132 is for interior use only.
• Do I need to prime the floor before use? In most cases, yes.Priming helps improve adhesion and reduce air bubbles and increases adhesion.
• How thick can it be applied? It can be applied from 2mm up to 10mm in one layer.
• How much area does one 16kg bag cover? Around 3m² at a 3mm thickness, depending on the surface.
• Does it require special mixing equipment? Use a slow-speed drill with a mixing paddle for best results.
• Can I tile directly onto the cured surface? Yes, once fully cured and primed if required, it’s ready for tiling.

"Always read the Technical Datasheet prior to first use to ensure you have the correct information and product for your application"

"Important Note this is a non returnable product "

while in our care all products are kept in a climate controlled store room, because this is a reactive product we could not resell the product if returned.

The Product should be stored out of direct sunlight until used