Sika Cement & Mortar Stain Remover Cemstrip 5 Litre 880609

Sika Cement and Mortar Stain Remover 5 Litre Masonry Surface and Tool Cleaner 880609

Barcode: 5029347611026

Ref: CEM5

MPN: 880609

Size: 5 Litre Tub

Overview

Sika Cement & Mortar Stain Remover is a direct replacement for Everbuild Cemstrip and is a concentrated multi-purpose cleaner developed for removing cement, mortar and concrete stains from most mineral surfaces including walls, paths, patios and Tools. Supplied in a handy 5 litre tub, it is suitable for cleaning tools, cement mixers and other construction equipment, making it a practical choice for both site use and general maintenance.

This versatile formula also helps remove surface salts and efflorescence from mineral substrates such as brick, while tackling ingrained dirt, grease and stains on paths and patios. It can be diluted with water to suit a range of cleaning tasks, giving professional users and DIY customers a flexible and economical cleaning solution.

Key Features

• Concentrated cement and mortar stain remover

• Removes wet and cured cement, mortar and concrete

• Suitable for most mineral surfaces including walls, paths and patios

• Can be used on tools, cement mixers and construction equipment

• Helps remove efflorescence and surface salts

• Multi-purpose formula that can be diluted for different applications or used neat

• Hydrochloric acid eco friendly alternative

• No solvents

• Water based clean-up

Specifications

• Brand: Sika

• Product Name: Cement & Mortar Stain Remover

• MPN: 880609

• Barcode: 5029347611026

• Ref Code: CEM5

• Size: 5 Litre Tub

• Container Type: 5 L plastic container

• Colour: Thin green/yellow liquid

• Density: 1.09 g/cm³ at +20 °C

• pH: 0.5 to 1.0

• Yield: Approx. 10m² per litre depending on surface porosity

• Shelf Life: 24 months in original unopened container

• Storage Conditions: Store between +5°C and +25°C in a cool, dry place, away from alkaline products and bleach

Applications

• Removing cement, mortar and concrete from paths, patios and walls

• Cleaning most mineral surfaces after building work

• Removing surface salts and efflorescence from brick and similar substrates

• Cleaning ingrained dirt, grease and stains from paths and patios

• Cleaning tools, cement mixers and other construction equipment

• General building and masonry clean-up work

How to Use

• Thoroughly wet paths, patios and similar surfaces before application and never apply to a dry surface

• Always test a small inconspicuous area before full application

• Dilute as required depending on the level of staining and the surface being cleaned Pour the correct amount of product into a bucket or large paint kettle for dilution

• For general cleaning on paths, patios and horizontal surfaces, dilute 9 parts water to 1 part product

• For light mortar stains on paths, patios, walls or vertical surfaces, dilute 2 parts water to 1 part product

• For heavy mortar stains on walls or vertical surfaces, dilute 1 part water to 1 part product

• For tools, cement mixers and construction equipment, use neat

• Apply by Paint brush or low pressure spray, leave for 5 to 10 minutes, then scrub or rinse off thoroughly use a tough Churn Cleaning Brush or similar

• Never allow the product to dry on the surface

• When cleaning tools and equipment, pre-wetting is not necessary; rinse thoroughly after soaking and cleaning

• After cleaning tools, apply a suitable maintenance spray to help prevent further corrosion or rusting

• Always read the manufacturer’s Technical Datasheet prior to first use

Sika Cement & Mortar Stain Remover FAQs

• What is Sika Cement & Mortar Stain Remover used for?
  It is used to remove cement, mortar and concrete stains from most mineral surfaces such as walls, paths and patios, and can also be used for cleaning tools and construction equipment.

• Can this product remove both fresh and hardened cement?
  Yes, it is suitable for removing both wet and cured cement, mortar and concrete deposits.

• Is Sika Cement & Mortar Stain Remover suitable for tools and mixers?
  Yes, it can be used on most metal tools, cement mixers and other construction equipment, making it a practical all-round site cleaner.

• Can it be diluted for lighter cleaning jobs?
  Yes, the concentrated formula can be diluted with water for a variety of applications or used neat for cleaning tools and equipment.

• Does it remove efflorescence from brick and masonry?
  Yes, it can help remove surface salts and efflorescence from mineral substrates such as brick.

• Can it be used on coloured cement-based paving?
  It is not recommended for coloured cement-based paving, and a small test area should always be checked before full application.

• Are there any surfaces to avoid?
  Avoid contact with sensitive surfaces such as brass, copper and aluminium, and remove any spills immediately with clean fresh water.

• Should the product ever be allowed to dry on the surface?
  No, it should never be allowed to dry on the surface. Always rinse thoroughly after treatment for best results.

Limitations

• Avoid contact with sensitive surfaces such as brass, copper and aluminium

• Not recommended for use on coloured cement-based paving

• Never allow the product to dry on the surface

• Always test compatibility with the surface and any paint coatings before full use

• Remove spills or excess product immediately using clean fresh water

• If mould or fungal growth is present, pre-treat with Sika 404 Fungicidal Wash

• The user is responsible for determining suitability for the intended application

"Always read the Technical Datasheet prior to first use to ensure you have the correct information and  product for your application"

It is the users responsibility to determine suitability for use. If in doubt contact technical services for advice.

All Surface Coatings Treatments and Cleaners