Alpha Chem Anchor Fast Chemical Anchor Adhesive Styrene free 300ml

Cromar Alpha Chem Anchor Fast Chemical Anchor Adhesive Styrene free 300ml

MPN X2ANCSF300

Barcode 5036684021692

Alpha Chem Anchorfast Chemical Anchor Resin CE approved fixing adhesive that's styrene free that also makes it suitable for internal applications it is a rapid curing two part chemical anchoring cartridge system that's solvent and styrene free based two part polyester anchoring adhesive resin.

Applied in one single action to produce a cost effective, tough, chemical resistant fixing suited for a reliable fixing with high performance and load capacity.

AlphaChem Anchor Fast chemical anchors are ideal for close to edge applications as no stress is placed on the surrounding substrate unlike expansive wall plug fixings.

Designed for heavy load applications internally or externally where a high strength bond is required in brickwork, concrete, masonry, stone etc.

Also suitable as a repair resin or adhesive resin for concrete components

Can be used in a standard 310ml strong gun such as the Powerpro Sealant Gun or HD Pro Professional Sealant Gun

Anchorfast Benefits

• Styrene Free
• Can be used in closed spaces
• Forms a water impermeable joint
• Allows fixing close to the edges due to the no expansion effect
  
• Suitable as a repair resin or adhesive resin for concrete
• CE approved 7 for application on non‐ cracked concrete
• CE approval for application on masonry
• Suitable for brickwork, concrete, masonry, stone etc
• Internal or external use
• Ideal for day to day applications
• Securing railings, steel structures, satellite dishes, fire surrounds, gates, sanitary fixings towel holders, pipes and much more

Anchor Fast Applications

On solid supports, used with galvanized steel, hot‐dip galvanized steel and stainless steel accessories.

On semi‐solid supports: stone, concrete, solid and hollow bricks.

Ideal for window and door frames

Alpha Chem Directions

1. Unscrew the cap and cut the top off the bag just under the metal clamp
2. Attach the mixer nozzle and place cartridge into a Professional Heavy Duty standard size applicator gun
3. Press the trigger until the product starts to pass through the mixer nozzle
4. Once the material extruded from the nozzle and is of an even colour it is ready to be used
5. Apply into holes as demonstrated on the application guide on the side of the packaging

More technical information is available on the technical data sheet that can be downloaded in pdf form.