Stearated Aluminium Oxide Roll Sanding sand Paper 320 Grit 228554

Stearated 320g Aluminium Oxide Roll Sanding Sand Paper 5 meters 228554

Barcode: 5055058177933

Option: 320 Grit

MPN: 228554

Overview:

The Stearated 320 Grit Fine Finishing Aluminium Oxide Sandpaper Roll 5 Metre 228554 is an industrial-quality abrasive designed for fine finishing and clean sanding with reduced clogging. Featuring zinc stearated aluminium oxide grain on a flexible backing paper, it uses an anti-clog open coat finish to help prevent loading when working on coatings, fillers and similar materials. Ideal for rubbing down paintwork and sanding fillers, sealants and lacquers, this 5 metre roll can be cut to size for hand sanding, sanding blocks or hand sanders. The 320 grit grade is suited to final preparation and smoothing prior to topcoats, lacquers or other finishing stages.

Key Features

• Fine 320 grit for smoothing and finishing preparation

• Zinc stearated aluminium oxide helps reduce clogging and loading

• Anti-clog open coat finish keeps the abrasive cutting cleanly

• Flexible backing paper for comfortable hand sanding and block use

• Ideal for paintwork, fillers, sealants and lacquer sanding

• Cut-to-length roll for multiple jobs and minimal waste

• Industrial quality for longer life and consistent performance

Specifications

• Brand: Silverline

• MPN: 228554

• Barcode: 5055058177933

• Option: 320 grit

• Roll Size: 115mm x 5m

• Grit / Grade: 320 grit

• Abrasive Material: Zinc stearated aluminium oxide

• Bond Type: Resin

• Finish: Anti-clog, open coat

• Colour: Grey

• Quantity: 1 roll

Applications

• Fine rubbing down paintwork prior to topcoats

• Final smoothing of filler and repair areas

• Sanding sealants and lacquers (task dependent)

• Keying surfaces for improved finish quality

• Cutting strips for hand sanding, blocks and hand sanders

How to Use

• Cut the roll to the size you need

• Wrap around a sanding or rubbing block for flatter, more even results

• Use light pressure and keep the surface clean from dust

• Replace the strip when it becomes loaded or performance drops

• Use a cleaning block to remove clogging and extend abrasive life

Grit Guide

120 grit is a coarser abrasive 240 grit is a finer abrasive.

Stearated 320 Grit Sandpaper Roll 228554 – Key FAQs

• What is 320 grit sandpaper best used for?
  320 grit is a fine grade ideal for final preparation and smoothing, such as rubbing down paintwork, refining filler and improving the finish before topcoats or lacquers.

• What does “stearated” mean on sandpaper?
  Stearated abrasives include a coating designed to reduce clogging, making them well suited to sanding paints, fillers and other materials that can load standard paper quickly.

• Can I use this roll by hand?
  Yes. It’s designed for hand sanding and works best wrapped around a sanding or rubbing block for consistent pressure on flat surfaces.

• What does an open coat finish do?
  Open coat leaves more space between abrasive grains so dust clears more easily, helping reduce loading and keeping the abrasive cutting cleanly for longer.

• How can I make the roll last longer?
  Use light pressure, clear dust frequently, and clean the abrasive if it loads up. A cleaning block removes clogging simply and efficiently.

• How does 320 grit compare to other grades?
  Lower numbers are coarser for faster removal, while higher numbers are finer for finishing. 320 grit is a fine grade used for smoothing and prep before final coatings.

You can extend the life of your Sanding belts discs etc by using a cleaning block this removes clogging simply and efficiently.

See all Sand Paper Rolls or browse the complete Abrasives and Glass Papers.