Stearated Aluminium Oxide Roll Sanding Sand Paper 240 Grit 571521

Stearated 240g Aluminium Oxide Roll Sanding Sand Paper 5 meter 571521

Barcode: 5055058177926

Option: 240 Grit

MPN: 571521

Overview:

The Stearated 240 Grit Aluminium Oxide Sandpaper Roll 5 Metre (571521) is an industrial-quality abrasive designed for clean, consistent sanding with reduced clogging. Featuring Zinc Stearated Aluminium Oxide grain on a flexible backing paper, it uses an anti-clog open coat finish to help prevent loading when working on softer or “sticky” materials. Ideal for rubbing down paintwork, sanding fillers, sealants and lacquers, this 115mm x 5m roll can be cut to size for hand sanding, sanding blocks or hand sanders. The 240 grit grade is a great choice for smoothing and finishing preparation before topcoats or finer abrasives.

Key Features

• 240 grit for smoothing and finishing preparation

• Zinc Stearated aluminium oxide for reduced clogging on coatings and fillers

• Anti-clog open coat finish helps keep the abrasive cutting cleanly

• Flexible backing paper for easy wrapping and controlled hand sanding

• Ideal for paintwork, fillers, sealants and lacquer sanding

• Can be used by hand or with a rubbing block/hand sander

• 5 metre roll can be cut to suit the job

Specifications

• Brand: Silverline

• MPN: 571521

• Barcode: 5055058177926

• Roll Size: 115mm x 5m

• Grade: 240 grit

• Abrasive Material: Zinc Stearated aluminium oxide

• Bond Type: Resin

• Finish: Anti-clog, open coat

• Colour: Grey

Applications

• Rubbing down paintwork prior to recoating

• Smoothing fillers and repair areas before finishing

• Sanding sealants and lacquers (task dependent)

• General fine preparation work on flat and profiled surfaces

• Cutting strips for hand sanding, blocks and hand sanders

How to Use

• Cut the roll to the length you need for the job

• Wrap around a sanding block for flatter, more even results

• Use light, even pressure and keep the surface clean from dust

• Replace the piece when performance drops or it becomes loaded

• For longer abrasive life, use a cleaning block to remove clogging

Grit Guide

240 grit is a finer abrasive used for smoothing and finishing preparation.

Stearated 240 Grit Sandpaper Roll 571521 – Key FAQs

• What is Stearated sandpaper used for?
  Stearated abrasives are designed to reduce clogging, making them ideal for sanding paint, fillers and other materials that can quickly load standard sandpaper.

• Is 240 grit suitable for rubbing down paintwork?
  Yes. 240 grit is commonly used for smoothing and keying paintwork prior to recoating, helping create a clean surface for better adhesion and finish quality.

• Can I use this roll by hand?
  Yes. The flexible backing makes it ideal for hand sanding, and it can also be wrapped around a sanding block for flatter, more even results.

• What does “open coat” mean?
  Open coat leaves more space between abrasive grains, allowing dust to clear more easily. This helps reduce loading and can extend usable life.

• How do I make the abrasive last longer?
  Use light pressure, keep the surface dust-free, and clean the abrasive when it loads up. A cleaning block can remove clogged debris quickly and efficiently.

• How does 240 grit compare to other grades?
  Lower numbers are coarser for faster removal, while higher numbers are finer for finishing. 240 grit sits in the finer range for smoothing and prep work.

You can extend the life of your Sanding belts discs etc by using a cleaning block this removes clogging simply and efficiently

See all Sand Paper Rolls or browse the complete Abrasives and Glass Papers.