Everbuild Black Jack 901 Black Bitumen Paint 486939 5 Litre 90105

Everbuild Black Jack 901 Black Bitumen Paint 486939 5 Litre 90105

Barcode: 5029347009151

Sika Code: 486939

MPN: 90105

Size Option: 5 Litre

Colour: Black

Everbuild 901 black Bitumen Paint solvent based 5 litre tin of full bodied fast drying black jack premium bitumen paint that provides an effective coating able to withstand the ever changing british weather its waterproof, weatherproof, corrosion resistant protective coating to many surface both porous and non porous.

Suitable for the protection of of many surface including metals, roofing such as corrugated sheet, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood against Weather damp and water attack. Fast drying, resistant to low concentrations of alkalis and acids and can with stand prolonged oxidation

Metal protection:

• Corrugated iron sheets
• Fire escapes and stairways
• Metal ladders
• Storage tanks
• Gutters and down pipes
• Metal fences, railings and gates

Masonry Felt and Roofing applications:

• As a protective coating for concrete structures
• Stone, brick, concrete blocks
• Concrete Floors and screeds
• Sand and cement surfaces
• Overcoating felt and wood

Product Application:

EVERBUILD BLACK BITUMEN PAINT is ready for use and should not be thinned. Apply by Paint brush or spray decant only the amount of paint that you can use in one go into a clean paint kettle and refit the lid back on to the tin.

A minimum of two coats of Bitumen Paint is required, the first coat been allowed to dry this normally takes 2 to 4 hours depending on weather conditions before the second coat of paint is applied.

How to Use:

1. Surface Preparation: Ensure the surface is clean, dry, and free from dust, grease, and loose material. Remove any rust or flaking paint from metal surfaces for best results.
2. Stir Thoroughly: Mix the paint well before application to ensure an even consistency.
3. Application: Apply with a brush, roller, or spray in thin, even coats. Multiple coats may be needed for full protection.
4. Drying Time: Allow each coat to dry for 4-6 hours before applying additional layers. Ensure adequate ventilation during application and drying.
5. Clean Up: Clean tools and equipment with white spirit immediately after use.

Questions and Answers:

FAQs for Small and Medium-Sized Projects:

Unique FAQs for Everbuild 901 Black Bitumen Paint (5 Litre)

1. Can Everbuild 901 be applied to damp surfaces?
While it is primarily designed for use on clean, dry surfaces, it can be applied to slightly damp surfaces in certain circumstances. However, the surface should not be excessively wet, as standing water or high moisture levels can impact adhesion and curing. For the best results, ensure the substrate is as dry as possible and free from dirt, grease, or loose material. If applying to a damp surface, consider applying a thin coat initially to allow proper bonding, followed by additional layers once the initial coat has dried.

2. How long does it take for Everbuild 901 Black Bitumen Paint to dry?
The drying time varies depending on environmental conditions such as temperature, humidity, and ventilation. Typically, the paint is touch-dry within 4-6 hours and fully cured in 24-48 hours. However, colder temperatures or high humidity may extend the drying time. Ensure adequate ventilation during application and drying to promote proper curing. If applying multiple coats, allow the first coat to dry completely before applying subsequent layers.

3. Is it suitable for protecting metal surfaces?
Yes, Everbuild 901 is an excellent choice for protecting metal surfaces against corrosion. Its waterproof and weather-resistant properties create a durable barrier that prevents moisture and air from causing rust. It is ideal for use on metal roofs, structural steel, and other exposed metal surfaces. To maximize performance, ensure the metal is thoroughly cleaned of rust, oil, and debris before application. A wire brush or rust remover may be used to prepare the surface.

4. Can this product be painted over or coated with other finishes?
It can be overcoated with certain materials, such as aluminium paints or bitumen-based topcoats, to enhance its durability or improve its appearance. However, it is not compatible with solvent-based paints or coatings, as they may soften or react with the bitumen layer. Always ensure the bitumen paint is fully cured before applying any additional coatings, and test compatibility on a small area if unsure. For non-standard applications, consult the product datasheet or seek professional advice, aluminium leafing primer can be used over the top to allow for other oil based paints to be applied.

The Everbuild 901 Black Bitumen Paint – 5 Litre is a reliable and cost-effective solution for waterproofing, rust prevention, and surface protection. Its smaller size makes it perfect for targeted repairs or medium-scale projects, while its professional-grade performance ensures long-lasting results in a variety of environments. Whether for roofing, foundations, or metalwork, this bitumen paint delivers exceptional durability and protection every time.

(Please note that tins will get dented in transit and this is not a reason for return please do not purchase tined products if this is an issue for yourself.)

"Always read the Technical Datasheet prior to first use to ensure you have the correct information and  product for your application"

All Paints