Prodec Painters and Decorators Surface Wipes Tack Cloth 10 Cloths PTR10P

Prodec Painters and Decorators Automotive Vehicle Finishers Surface Wipes Tack Cloth 10 Cloths PTR10P

Size:  30 x 16 inch

MPN: PTR10P

Barcode: 5019200035427

Overview:

Prodec 10-Pack Tack Cloths an essential tool for flawless painting and finishing, Prodec Tack-Cloths are pre-treated wipes designed to remove fine dust, dirt and fibres from surfaces before painting, staining or lacquering. Each cloth measures approximately 30" x 16", giving generous coverage for doors, panels and bodywork.

They are ideal for vehicle refinishers, painters and decorators, woodworkers and furniture restorers who need a clean, dust-free surface for a high-quality finish. Supplied as a pack of 10, these tack cloths are ready to use straight from the pack for both professional and DIY projects.

Key Features

• Pre-treated tack cloths for effective dust and fine particle removal

• Large 30" x 16" cloth size for good coverage on panels and doors

• Ideal for use before applying paint, stain, varnish or clear coat

• Suitable for wood, metal and many plastic surfaces

• Helps improve adhesion and final finish quality by reducing contamination

• Supplied as a pack of 10, useful for ongoing work and multiple projects

• Individually folded cloths for convenient, clean handling

Specifications

• Brand: Prodec

• Product Type: Tack cloths / surface preparation wipes

• MPN: PTR10P

• Barcode: 5019200035427

• Cloth Size: Approx. 30" x 16"

• Quantity: 10 cloths per pack

• Material: Impregnated fabric designed to pick up dust

• Typical Surfaces: Wood, metal, many plastics (check on a small test area)

• Use Stage: Final dust removal before painting, staining or finishing

Applications

• Surface preparation for automotive refinishing and bodywork repairs

• Painters and decorators preparing doors, trim, skirting and frames

• Woodworking and furniture finishing before applying stain or lacquer

• Removing fine dust from kitchen doors and cabinets prior to repainting

• Final wipe-down of panels and joinery before clear coat or varnish

• General dust removal on prepared surfaces in workshops and spray areas

How to Use

• Ensure the surface is dry and free from loose debris and sanding residue

• Lightly unfold the tack cloth and wipe the surface with gentle, sweeping motions

• Refold the cloth regularly to expose a clean area as it becomes loaded with dust

• Use before each coat of paint, stain or clear finish for best results

• Once the cloth no longer picks up dust effectively, dispose of it and use a fresh one

Prodec Tack Cloths – Key FAQs

• How often should I replace each tack cloth?
    Replace the cloth when it stops picking up dust effectively, typically after one thorough use on a moderate-sized area or when it appears heavily loaded with particles.

• Are these cloths suitable for automotive paintwork?
    Yes, they are widely used for vehicle refinishing and are suitable for wiping down panels and bodywork before applying primer, basecoat or clearcoat.

• Can I use these tack cloths on any painted surface?
    They are intended for prepared surfaces before painting or refinishing. Always test on a small inconspicuous area if you are unsure about compatibility with existing coatings.

• Will the cloths leave residue on the surface?
    Used correctly with a light touch, they are designed to leave the surface clean and free of dust without leaving noticeable residue.

• Can I use a tack cloth on a wet or tacky surface?
    No, they work best on dry, fully cured surfaces. Using them on wet or freshly painted surfaces can reduce effectiveness and may mark the finish.

• How should I store unused tack cloths?
    Keep them sealed in their original packaging or an airtight container in a cool, dry place to help maintain their tackiness until needed.

Take a look at the full range of Prodec decorating tools, wipes and surface preparation products to support your painting and finishing projects.