Silverline Non Sparking Filament Abrasive Wheel 100mm Coarse 589713

Silverline Non Sparking Filament Abrasive Wheel 100mm 4 inch Spindle Brush

Barcode: 5024763035661

Grade: Coarse

MPN: 589713

Overview:

Spindle Shaft Non Sparking Filament 100mm Abrasive Wheel a coarse-grade cleaning and surface preparation wheel designed for use with drills and compatible rotary tools. It features tough nylon filaments impregnated with coarse silicon carbide grit, giving a consistent abrasive action for deburring, cleaning and finishing without the harsh scratching often associated with wire wheels. The non-sparking design makes it a safer option where sparks are best avoided, especially when working around flammables. With a thin wheel profile, it’s also ideal for getting into corners, edges and tighter areas on metal and wood surfaces.

Key Features

• Coarse filament abrasive wheel for fast surface cleaning and prep

• Nylon filaments impregnated with coarse silicon carbide grit for consistent cutting

• Non-sparking action for improved safety where sparks are a concern

• Thin profile helps access corners and tighter spaces

• 6mm shank fits most drill chucks and suitable rotary tools

• Max RPM clearly marked on the wheel for quick safety reference

Specifications

• Brand: Silverline

• MPN: 589713

• Barcode: 5024763035661

• Wheel Size: 100mm (4")

• Grade: Coarse

• Shank Diameter: 6mm

• Abrasive Type: Silicon carbide impregnated nylon

• Non-Sparking: Yes

• Max Speed: 4,500rpm

Applications

• Deburring and cleaning cut edges on metal

• Surface preparation before painting, bonding or coating

• Removing light rust, oxidation, paint and grime

• Cleaning and finishing wood and metal surfaces

• Working into corners, edges and awkward areas

How to Use

• Insert the 6mm shank into the drill chuck and tighten securely

• Run at a controlled speed and do not exceed 4,500rpm

• Use light, even pressure and keep the wheel moving for a consistent finish

• For corners and edges, work gradually to avoid gouging

• Brush off debris after use and store dry

Filament Abrasive Wheel – Key FAQs

• What’s the difference between this and a wire wheel?
  This uses abrasive nylon filaments, which gives a more controlled, less aggressive finish and reduces the chance of sparking compared to metal wire.

• Is it suitable for stainless steel?
  It can be used for surface cleaning and prep, but for heavy corrosion you may need a more aggressive method first.

• Will it work in a standard drill?
  Yes, the 6mm shank fits most drill chucks.

• What is it best used for?
  Deburring, cleaning and preparing surfaces on metal and wood, especially in corners and tight spots.

• What speed should I use?
  Keep below the stated maximum of 4,500rpm and use steady pressure for best control.