Silverline Drill Mixing Paddle Paint Plaster Mixer 100mm 282512

Silverline Electric Drill Zinc Plated Mixing Paddle Paints and Plasters

Barcode: 5055058166692

MPN: 282512

Overview:

The 282512 Electric Drill Zinc Plated Mixing Paddle for Paints and Plasters is a practical, drill-driven paddle designed for fast, consistent mixing of common building and decorating materials. With a 9mm hex shank for secure drive in a standard drill chuck, it’s ideal for blending paint, resins, plaster, cement slurries and textured coatings with reduced effort and more even results. The zinc plated finish helps resist corrosion and makes the paddle easier to wipe clean after use. Compact at 100mm wide and 580mm long, it’s well suited to mixing in buckets and tubs while keeping your drill clear of the material.

Key Features

• Drill-powered mixing paddle for paints, plasters and general mixes

• 9mm hex shank for secure grip and reduced slipping

• 100mm blade for efficient mixing in buckets and tubs

• Zinc plated finish for improved corrosion resistance

• Suitable for paint, resins, plaster, cement slurries and textured coatings

• Requires a 10mm or larger drill chuck

• Designed for controlled, low-speed mixing up to 580rpm

Specifications

• Brand: Silverline

• MPN: 282512

• Barcode: 5055058166692

• Product Type: Mixing paddle / drill mixer attachment

• Blade Width: 100mm

• Overall Size: 100mm x 580mm

• Connector / Shaft: 9mm hex

• Chuck Requirement: 10mm or larger

• Max Speed: 580 rpm

• Finish: Zinc plated

Applications

• Mixing paint and textured coatings

• Blending plaster and patching compounds

• Mixing resins and similar liquid products

• Cement slurries and other light cement-based mixes

How to Use

• Fit the hex shank into a 10mm+ chuck and tighten securely

• Start at a low speed and keep the paddle head submerged to reduce splashing

• Mix steadily, moving around the bucket for an even blend

• Do not exceed 580rpm

• Clean the paddle immediately after use to prevent build-up

100mm Mixing Paddle 282512 – Key FAQs

• What chuck size do I need?
  You need a 10mm or larger chuck to use the 9mm hex shank securely.

• What can I mix with this paddle?
  It’s suitable for paint, plaster, resins, cement slurries and textured coatings, depending on the product consistency and drill torque.

• What is the maximum speed?
  The recommended maximum speed is 580rpm for controlled mixing and reduced splash.

• Why is a hex shank useful?
  A hex shank helps reduce slipping in the chuck, especially when mixing thicker materials.

• Is the finish corrosion resistant?
  Yes. The zinc plated finish helps protect against corrosion and makes cleaning easier.

• Can I use it in a standard electric drill?
  Yes, as long as the drill has a 10mm+ chuck and sufficient power for the material you’re mixing.