Silverline Polishing M14 Polisher Ultra Soft Foam Sponge Head 150mm 868541

Silverline 150mm Polishing M14 Polisher Ultra Soft Red Foam Sponge Head

Colour Coded: Red

Barcode: 5055058113610

MPN: 868541

Size: 150mm 6 inch

Overview:

150mm Polishing M14 Polisher Ultra Soft Red Foam Sponge Head 868541 is a colour-coded finishing pad designed for final polishing and refining on vehicle and marine surfaces. The ultra soft polyurethane foam is ideal for applying finishing polish or glaze and for achieving a smoother, higher-gloss result on paintwork, plastics and gel coats. It features an M14 x 2 female thread for quick fitting to compatible M14 x 2 male polishers, sanders and grinders, and the pad is bonded to a backing plate for stable, controlled operation. Rated to a maximum of 4600rpm, it’s a practical choice for detailing and finishing work where a softer pad helps produce the best final result.

Key Features

• Ultra soft red foam pad for final polishing and finishing

• 150mm diameter suits many common polishers and backing sizes

• Colour-coded red for quick identification of pad type

• Ideal for paint, plastics, gel coat and other finishing surfaces

• M14 x 2 female thread for fast fitting and removal

• Securely bonded construction for reliable use

• Suitable for automotive and marine detailing tasks

• Maximum speed rating 4600rpm

Specifications

• Brand: Silverline

• Product Type: Foam polishing sponge head / finishing pad

• MPN: 868541

• Colour: Red (colour coded)

• Type: Ultra soft

• Dimensions: Approx. 6 inch 150mm x 50mm

• Connector Size: Female M14 x 2

• Maximum RPM: 4600rpm

• Construction: Glued / bonded

• Secondary Construction: Plastic backing pad

• Suitable For: Final polishing and finishing

Applications

• Final-stage polishing on vehicle paintwork

• Finishing and refining gel coat on boats

• Applying finishing polishes, glazes or refiners (product dependent)

• Buffing plastics and painted surfaces (test first)

• Detailing and valeting work for a high-gloss finish

How to Use

• Ensure your machine has an M14 x 2 male thread and is suitable for polishing

• Screw the pad on by hand until secure (do not overtighten)

• Apply a suitable finishing polish to the pad or surface

• Work at an appropriate speed, staying below 4600rpm maximum

• Keep the pad moving to avoid heat build-up and swirl marks

• Clean the pad after use and allow to dry before storage

150mm 6 inch Ultra Soft Red Foam Polishing Pad – Key FAQs

• What is an ultra soft red polishing pad best used for?
  Ultra soft pads are typically used for final polishing and finishing, helping refine the surface and improve gloss after earlier cutting or polishing stages.

• Does this pad fit any polisher?
  It fits machines with an M14 x 2 male thread, including many polishers and most angle grinders/sanders, always confirm thread type and suitability before use.

• What surfaces can I use it on?
  It’s designed for paintwork, plastics, gel coats and similar finishes. Always test on a small area first, especially on delicate or older finishes.

• What is the maximum safe speed?
  The pad is rated to a maximum of 4600rpm. Do not exceed this speed and always follow your machine and compound/polish guidance.

• Is this pad for cutting/compounding?
  No, it’s primarily for finishing. For heavier correction or compounding, use a firmer pad designed for cutting stages.

• How do I avoid swirl marks when finishing?
  Use light pressure, keep the pad flat, avoid dry buffing, and keep the pad moving. Clean the pad regularly during use to prevent residue build-up.

• How should I clean the pad after use?
  Rinse with warm water and a mild detergent if needed, squeeze gently (don’t wring aggressively), then air dry fully before storing.

Take a look at The full Range of Detailing and valeting products