Amtech S1500 Blast Waste Pipe Unblocker Drain Suction Plunger

Amtech S1500 Blast Waste Pipe Unblocker Drain Suction Plunger

Barcode: 5032759009954

MPN: S1500

Overview:

The Blast Waste Pipe Unblocker Plunger is a fast, practical way to clear blocked sinks, baths and shower wastes using water pressure rather than harsh chemicals. Designed to force a high-pressure blast of water into the waste pipe, it helps dislodge stubborn clogs caused by hair, soap build-up, grease and everyday debris. The polypropylene body is lightweight yet durable, with a 60mm rubber suction head that forms a seal over many common waste outlets. Simple to operate and easy to store, it’s an ideal household tool for tackling blockages quickly and keeping drains flowing freely.

Key Features

• High-pressure water blast helps shift stubborn waste pipe blockages

• Suitable for sinks, baths and shower waste outlets

• Polypropylene body for lightweight, durable everyday use

• 60mm rubber suction head helps form a strong seal over the drain

• Chemical-free method using water pressure to clear clogs

• Compact size for easy storage when not in use

Specifications

• Brand: Blast

• MPN: S1500

• Tool Type: Waste pipe unblocker plunger / pump

• Body Material: Polypropylene

• Suction Head Diameter: 60mm

• Length (Closed): 390mm

Applications

• Clearing blocked kitchen sink wastes

• Unblocking bathroom basins, baths and shower tray drains

• Dislodging hair, soap scum and grease build-ups

• Routine household drain maintenance without chemicals

How to Use

• Ensure there is some water in the basin/bath to help create a seal

• Place the rubber head firmly over the waste outlet

• Hold steady and operate the pump to force water pressure into the pipe

• Repeat a few times until the blockage clears and water drains freely

• Flush with warm water to help clear any remaining debris

• Rinse the tool after use and allow it to dry before storage

Blast Waste Pipe Unblocker – Key FAQs

• How does the Blast S1500 waste pipe unblocker work?
  It forces a high-pressure blast of water into the waste pipe. This pressure helps break up and push through clogs, clearing the blockage without chemicals.

• What drains can I use it on?
  It’s suitable for many household wastes including sinks, baths and shower outlets. The 60mm rubber head is designed to seal over common waste openings.

• Will it work on very stubborn blockages?
  It’s designed to tackle tough clogs, but results depend on the blockage type and severity. Repeat pumping and flushing often improves success.

• Do I need to use drain chemicals with it?
  No. It’s intended as a chemical-free solution. If chemicals have already been used, take care to avoid splashes and rinse thoroughly afterwards.

• Will it damage my pipes?
  Used correctly on domestic waste pipes, it’s generally safe. Avoid excessive force and ensure the head is sealed to prevent spraying and unnecessary strain.

• What types of clogs does it clear best?
  It’s effective on common household blockages such as hair, soap residue, grease and food debris in sinks and bathroom wastes.

• Does it need assembling or batteries?
  No. It’s a simple manual pump tool ready to use with no power required.

Amtech Warranty Statement:

We work hard to make sure Amtech tools are reliable as well as affordable. However, if you have a problem with any product, we want to get your job up and running again as quickly as possible. All our hand tools are backed by a three year product replacement warranty and our power tools range are covered for up to two years. So if something develops a fault within the specified warranty period, we'll replace it, subject to proof of purchase. Amtech Warranty Contact Proof of purchase needed