Joint It Manual 2 Part Epoxy Grout Application Gun 400ml JIPEG-MGU

Joint It Manual Porcelain 2 Part Epoxy Paving Grout Application Gun 400ml

MPN: JIPEG-MGU

Designed to push the 2 part material through a mixing nozzle and into the joints.

Always make sure the material being expelled from the nozzle is of uniform colour.

For optimal application, it's best to cut the nozzle tip as large as necessary for your specific project since epoxy grout is quite thick and requires substantial pressure to extrude. Additionally, warming the product before use can significantly ease the application process, making the material more manageable and smoother to apply.

(For use when applying small runs of work for larger runs of work use a battery gun)

Main Benefits:

• For use with 2 part joint it epoxy grout
• Enables smooth even application of the pointing compound
• Suitable for 400ml parallel 42mm parallel tubes

Applying Joint It Epoxy Grout:

Ensure paving is clean and dry and that rain is not expected before you can complete application.

Epoxy grout should not be used below 5 degree C or above 25 degree C, the paving tiles need to be laid securely with no movement in the slabs.

Apply the Joint It Anti Bonding wax to either side of the joints using the sponge provided this is an important step as this protects the slabs acting as a barrier between the grout and the slab, the anti bonding agent makes it easy to peel off the excess grout after smoothing, the areas should be waxed no more than 10 to 15 minutes before applying the epoxy grout.

Remover the twist cap from the top of the tube attach the mixing nozzle supplied with the tube, cut the nozzle with a safety Knife to the size of the paving joints, insert the tube into the application gun squeeze the trigger to force the product through the mixing nozzle discard the first 2 centimetres of product as this may not be mixed thoughrally and may have streaks in it, now the product can be used apply the product slowly making sure that there are no gaps in your gunning the product needs to rise a fraction Infront of the product to make sure that there is adequate product in the joint.

10 to 15 minutes after the grout has been applied its ready for the Joint It Smoothing Tool the most common tool is the ball end tool pull it along the joint to firm the product and create a smooth finish.

Once the product has begun to set and feels hard to touch its time to use the Joint It Scraper or blade keeping the tool flat on the surface remove the excess product, if the grout seems sticky its not ready and needs to be given more time this is were you see the anti bonding wax coming into its own preventing product from staining and sticking to the face areas of the porcelain the epoxy grout should come away from this surface with ease, always use the blade away from you and others little pressure should be needed don't use the blade on areas that have not been waxed.

Video Demonstration How to use and apply Joint It Epoxy Grout to Porcelain slabs in your outdoor living space.