Silverline Non Contact AC Live Wire Voltage Detector 675220

Silverline Non Contact AC Live Wire Voltage Detector

MPN: 675220

Barcode: 5055058178558

Overview:

Non Contact AC Live Wire Voltage Detector 675220 is a quick, convenient tester for identifying live AC voltage without touching bare conductors. Designed for use on outlets, light fittings, circuit breakers, electrical wires and cables, it helps you confirm the presence of voltage and is also handy for tracing and finding breaks in wiring. Clear LED indication combined with an audible alarm provides fast feedback in busy work environments. With a 70V–1000V AC detection range and a compact 150mm pen-style design, it’s an essential electrical safety tool for installers, maintenance teams and DIY users (always follow safe isolation procedures).

Key Features

• Non-contact AC voltage detection for fast live checks

• Suitable for outlets, light fittings, breakers, wires and cables

• Helps locate breaks in wires during fault-finding

• LED indicator and audible alarm for clear status feedback

• Wide detection range for common electrical work

• Compact pen-style body for easy carry and storage

Specifications

• Brand: Silverline

• Product Type: Non-contact AC voltage detector

• AC Voltage Range: 70V – 1000V

• AC Frequency: 50/60Hz

• Measurement Category: CAT III 1000V (UL3111-1) / CAT IV 600V (IEC61010-1)

• Overall Length: 150mm

• Batteries Required: 2 x AAA

• Finish: Natural

• MPN: 675220

Applications

• Checking sockets and outlets for live voltage

• Testing cables and wires before work begins

• Identifying live circuits at breakers and consumer units

• Confirming voltage presence at light fittings and switches

• Fault finding and tracing breaks in wiring

How to Use

• Fit 2 x AAA batteries (observe polarity)

• Switch on and verify operation on a known live source

• Bring the tip close to the cable, outlet or fitting (do not contact exposed conductors)

• Watch for the LED and listen for the audible alarm

• Re-test on a known live source after checks to confirm the tester is working

• Always isolate safely—use appropriate test procedures for electrical work

Note: Metal Floors/Walls and Foil backed plasterboard may interfere with the sensing of cables

Silverline Non Contact Voltage Detector 675220 – Key FAQs

• What voltage range does this detector cover?
  It detects AC voltage from 70V to 1000V, suitable for many common electrical checks.

• Does it need to touch the wire to work?
  No, it’s a non-contact detector hold the tip close to the cable or fitting to sense voltage.

• How does it alert me to voltage?
  It uses an LED indicator and an audible alarm to signal the presence of AC voltage.

• Can it help find a break in a wire?
  Yes, it can help with fault finding by indicating where voltage presence stops along a cable run, which may suggest a break.

• What batteries does it use?
  It requires 2 x AAA batteries (Supplied Separately)

• Is this a replacement for proper safe-isolation testing?
  No. A non-contact tester is a quick check tool always follow proper isolation procedures and use appropriate test equipment for electrical work.