Fixman 10J Stapler Staples 11.2mm x 14mm 5000pk 455701

Fixman 10J Galvanised Stapler Staples 11.2mm x 14mm 5000pk

MPN: 455701

Barcode: 5024763176128

Overview:

Fixman 11.2mm x 14mm 10J Galvanised Stapler Staples are heavy duty flat wire staples designed for strong, wide-coverage fastening across everyday trade and DIY tasks. With an 11.2mm crown and 14mm leg length, they’re ideal when you want a secure hold while spreading pressure across the material perfect for sheet goods, membranes, fabrics and general fixing work. The galvanised finish helps resist corrosion for longer-lasting performance, and the 5000 pack size is ideal for regular use with fewer reloads. Suitable for a wide range of staple guns, hammer tackers, and air or electric wide crown staplers that take 10J / 20ga 7/16" crown staples.

Key Features

• Heavy duty flat wire 10J staples for strong, reliable fastening

• 11.2mm (7/16") wide crown spreads load and improves grip

• 14mm leg length for deeper penetration into timber and sheet materials

• Galvanised finish helps resist corrosion and wear

• Compatible with many manual, hammer tacker, air and electric staplers

• Ideal for regular users with a large 5000 staple pack

• Suitable for 20ga wide crown staplers that accept 10J pattern staples

Specifications

• Brand: Fixman

• Product Type: 10J Flat Wire Staples (Wide Crown)

• Staple Size: 11.2mm crown x 14mm leg

• Gauge/Wire: 20ga (approx. 0.92mm wire)

• Material: Galvanised metal wire

• Pack Quantity: 5000

• Compatibility: 20ga wide crown staplers / 7/16" crown staplers using 10J pattern staples

• Known Compatible Tools: Silverline 3 in 1 Staple Gun; Workzone WZEN20; Powerfix Profi Z16531 (and similar 20ga 7/16" crown staplers)

• MPN: 455701

Applications

• Fixing sheeting, lightweight boards and trims

• Securing fabrics, felt and insulation materials

• Attaching membranes and protective coverings

• General workshop, site and DIY fastening tasks

• Use with staple guns and hammer tackers where 10J staples are required

How to Use

• Check your tool specification confirms 10J / 20ga / 7/16" crown staples and supports 14mm length.

• Open the magazine safely (disconnect air/power where applicable).

• Load the staple strip correctly with the crown seated in the channel.

• Close the magazine and test fire into scrap material.

• Adjust drive depth if your tool allows to avoid over-driving.

• Store remaining staples dry to keep them clean and ready to use.

Fixman 10J Galvanised Staples 14mm – Key FAQs

• What are Fixman 10J staples used for?

  • They’re used for wide-crown fastening where you want strong holding power and better load spread, such as fabrics, membranes, sheeting and general fixing work.

• What does 11.2mm crown mean?

  • The crown is the top width of the staple 11.2mm (7/16") is a wide crown that helps grip more surface area and reduces pull-through on softer materials.

• Will these 14mm staples fit my stapler or hammer tacker?

  • They fit tools that accept 10J / 20ga / 7/16" crown staples; always confirm your stapler supports 14mm length before buying.

• Are these staples compatible with Silverline 3 in 1 staple guns?

  • Yes, they’re compatible with the Silverline 3 in 1 staple gun, along with other tools that use 10J/20ga wide crown staples.

• Does galvanised mean they can be used outside?

  • The galvanised finish offers improved corrosion resistance for many tasks, but suitability depends on exposure conditions and the material being fixed.

• How many staples are included in the pack?

  • You get 5000 staples, ideal for frequent use and reducing the need for constant reloading.