Silverline Kitchen Fitters TCT Router 1/2 1/4 inch Bit 4pc Set 719769

Silverline Tools Kitchen Fitters TCT Router 1/2" 1/4" Bit - 4 Piece Set

Barcode: 5055058112262

MPN: 719769

Overview:

Kitchen Fitters TCT Router Bit 4pc Set is a practical selection of cutters for common kitchen fitting and worktop preparation tasks. Each bit features tungsten carbide tipped (TCT) cutting edges with hardened steel shanks for durability, and twin flutes to help deliver a cleaner, smoother finish in use. Supplied in a sturdy wooden storage case with labelled slots, it keeps your cutters organised and protected between jobs. For added safety and correct setup, maximum RPM guidance is marked on each shank, and a hex key is included for convenient fitting where required.

Key Features

• 4-piece router bit set suited to kitchen fitting and worktop tasks

• Tungsten carbide tipped (TCT) cutting edges for durability and clean cutting

• Hardened steel shanks for strength and stability

• Twin-fluted cutters for a smoother finish

• Mixed shank sizes: 1/2" and 1/4" for wider compatibility

• Max RPM guidance marked on each bit shank for safer operation

• Wooden storage case with dedicated slots and size markings

• Includes hex key

Specifications

• Brand: Silverline Tools

• Product Type: TCT router bit set

• Pieces: 4 bits + hex key

• Cutting Edge Type: TCT (tungsten carbide tipped)

• Flute Type: Twin fluted

• Construction: Ground/milled and brazed

• Finish: Painted / polished

• Maximum RPM (as stated on shanks): 10,000 to 24,000rpm (varies by bit)

• Hardened: Yes

• MPN: 719769

• Barcode: 5055058112262

What’s Included

• 1 x Straight bit: 63mm x 12.7mm, 1/2" shank

• 2 x Straight bit: 50mm x 12.7mm, 1/2" shank

• 1 x Flush trim bit: 25.4mm x 12.7mm, 1/4" shank

• 1 x Hex key

• Wooden storage case

Applications

• Kitchen fitting and worktop routing tasks

• Straight trimming and grooving (straight bits)

• Edge trimming and copying to a template (flush trim bit)

• General woodworking where a 12.7mm cutter is required

How to Use

• Select the correct bit and confirm the shank size matches your router collet

• Insert the shank fully, then withdraw slightly before tightening for secure clamping

• Tighten the collet firmly using the correct tools/hex key as required

• Set a suitable depth and keep within the maximum RPM stated on the bit

• Make controlled passes—avoid forcing the cutter, and use multiple shallow passes for best results

• Clean and return bits to the wooden case after use

Kitchen Fitters TCT Router Bit Set – Key FAQs

• What is this 4-piece router bit set used for?
  It’s designed for common kitchen fitting and woodworking tasks, including straight routing, trimming, and flush trimming to templates or edges.

• What shank sizes are included in the set?
  The set includes 1/2" shank straight bits and a 1/4" shank flush trim bit, giving compatibility with many popular routers and trimmers.

• Are the cutters tungsten carbide tipped (TCT)?
  Yes, each bit features TCT cutting edges, designed to provide a clean cut and improved wear resistance compared with non-tipped cutters.

• Why is the maximum RPM marked on the shank?
  It helps you set the correct speed for safer operation. Always keep your router within the maximum RPM stated on the specific bit you’re using.

• Will these bits give a smooth finish?
  The bits are twin fluted, which helps produce a cleaner, smoother finish when used correctly with steady feed and suitable depth settings.

• How should I store these router bits?
  Store them in the supplied wooden case to protect the cutting edges and keep each bit organised, helping reduce damage between jobs.