Silverline 1/4 inch Flush Trim Router Bit Cutter 794324

Silverline 1/4 inch Flush Trim Router Bit Cutter 1/4 inch x 1/2 inch

Barcode: 5055058135278

MPN: 794324

Overview:

1/4 inch Shaft Flush Trim Router Cutter (1/4 inch x 1/2 inch) Bit is designed for clean, accurate trimming of laminated boards and veneers, as well as template routing work. Built with TCT cutting edges and a twin flute design, it produces a smoother finish while maintaining strong cutting performance. The hardened steel shank improves durability and stability in use, helping you achieve neat, consistent results on edging and pattern work. For added convenience and safety, the size and maximum RPM are clearly marked on the shaft for quick reference before use.

Key Features

• Flush trim router bit for laminates, veneers and template routing

• TCT cutting edges for durability and clean cutting performance

• Twin flute design helps deliver a smoother finish

• Strong hardened steel shank for stability in the collet

• Positive 3° shear angle for efficient trimming action

• Size and maximum RPM marked on the shaft for quick checking

• Rust-resistant coated finish for longer service life

Specifications

• Brand: Silverline

• Product Type: Flush Trim Router Bit Cutter

• MPN: 794324

• Size: 1/4 inch x 1/2 inch

• Maximum RPM: 24,000rpm

• Construction Method: Ground/milled and brazed

• Cutting Edge Type: TCT cutting edges

• Secondary Material: Tungsten carbide YG8

• Shank: Hardened steel

• Shank Length: 30mm

• Shear Angle: Positive shear angle 3°

• Finish: Painted flute, polished shank, dry rust resistant coating

Applications

• Trimming laminated boards flush to a substrate

• Veneer edge trimming for a neat, finished look

• Template routing and pattern following work

• Clean edge finishing on sheet materials and panels

• General routing tasks where a smooth trim cut is required

How to Use

• Confirm your router accepts a 1/4 inch shank cutter and fit it securely

• Check the maximum speed marking and keep within 24,000rpm

• Set up the template or edge guide and ensure the workpiece is clamped firmly

• Make controlled passes, letting the cutter do the work without forcing

• For best results, take lighter passes on harder materials and tricky grain

• Power off and allow the bit to stop fully before removing or adjusting

1/4 inch Flush Trim Router Bit Cutter – Key FAQs

• What is this flush trim router bit used for?
  It’s designed for trimming laminated boards and veneers flush to the workpiece, and for template routing where you need accurate, repeatable edge profiles.

• Does this router bit have TCT cutting edges?
  Yes. It features TCT cutting edges made with tungsten carbide (YG8), helping provide durability and clean trimming performance.

• What shank size does it use?
  This cutter is designed for a 1/4 inch shank router collet. Always confirm your router’s collet size before fitting.

• Why Does a Router Bit have a maximum recommended speed?
  The maximum speed is 24,000rpm. The size and RPM are marked on the shaft to help you confirm safe settings before use, this is up to optimum results faster could result in breakages and overheating.

• Will the twin flute design improve the finish?
  The twin flute design is intended to provide a smoother finish by balancing the cut and improving chip removal during trimming.

• Is the shank hardened for strength?
  Yes. It features a hardened steel shank to improve strength, stability and longevity during repeated routing tasks.