Silverline SDS Plus Masonry Drill Bit Set 5pc 930164

Silverline SDS Plus Masonry Drill Bit 5 Piece Mixed Set

Sizes in Set: 5mm 6mm 7mm 8mm and 10mm

Barcode: 5060012961176

MPN: 930164

Overview:

5 Piece Mixed SDS Plus Masonry Drill Bit Set 930164 includes the most commonly used sizes for drilling into brick, block, stone and concrete. With a twin flute design for faster dust and waste removal, these bits help maintain drilling efficiency and reduce binding in the hole. Each bit features an ultra-strong tungsten carbide tip for durability and reliable cutting performance, along with a rust-resistant coating and sand blasted finish. Designed to fit any SDS Plus electric or cordless rotary hammer drill, this mixed set  5mm 6mm 7mm 8mm and 10mm is ideal for trade and DIY jobs alike.

Key Features

• 5-piece SDS Plus masonry drill bit set in popular sizes (5–10mm)

• Twin flute design for quicker waste removal and smoother drilling

• Ultra-strong tungsten carbide tips for long-lasting performance

• Hardened construction for durability in tough materials

• Rust-resistant coating to help protect during storage

• Sand blasted finish for a hard-wearing surface

• Fits SDS Plus electric and cordless rotary hammer drills

• Ideal for brick, block, masonry, stone and concrete

Specifications

• Brand: Silverline

• Product Type: SDS Plus Masonry Drill Bit Set

• Shank Type: SDS Plus

• Flute Type: Twin flute

• Tip Material: Tungsten carbide

• Finish/Coating: Sand blasted finish with rust-resistant coating

• Hardened: Yes

• Quantity: 5 piece set

• MPN: 930164

Sizes in Set

• 5mm x 110mm

• 6mm x 110mm

• 7mm x 160mm

• 8mm x 160mm

• 10mm x 160mm

Applications

• Drilling anchor and fixing holes in brick and blockwork

• Masonry drilling for plugs, screws and wall fixings

• General drilling in stone and concrete (with SDS Plus rotary hammer)

• Electrical, plumbing and general installation work

How to Use

• Select the correct bit size for the fixing and required hole depth

• Insert the SDS Plus shank fully into the drill chuck until it locks

• Use rotary hammer mode for masonry and concrete drilling

• Start straight and apply steady pressure avoid forcing the bit

• Withdraw occasionally to clear dust, especially in deeper holes

• Allow the bit to cool between holes and store dry after use

SDS Plus Masonry Drill Bit Set 930164 – Key FAQs

• What drills are compatible with this SDS Plus bit set?
  These bits are designed for SDS Plus electric or cordless rotary hammer drills, where the SDS Plus shank locks into the chuck for efficient power transfer.

• What materials can these masonry drill bits be used on?
  They’re suited to brick, blockwork, stone and concrete. For best results in harder concrete, use a rotary hammer drill and the correct drilling mode.

• What is the advantage of the twin flute design?
  Twin flutes help remove dust and waste more quickly, which can improve drilling speed, reduce binding and help keep the hole cleaner as you drill.

• Are the tips tungsten carbide?
  Yes the set features ultra-strong tungsten carbide tips designed to handle demanding masonry drilling and maintain cutting performance over repeated use.

• What sizes are included in the 5-piece set?
  The set includes 5mm x 110mm, 6mm x 110mm, 7mm x 160mm, 8mm x 160mm and 10mm x 160mm bits.

• Do the bits have any protection against rust?
  Yes each bit has a rust-resistant coating to help protect during storage, especially if you keep the set dry and clean after use.